5153 - Splitter TELEVES - Free user manual and instructions
Find the device manual for free 5153 TELEVES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | TV signal splitter |
| Brand | Televes |
| Model | 5153 |
| Category | Splitter |
| Number of outputs | 2 |
| Frequency range | 5-2400 MHz |
| Impedance | 75 ohms |
| Insertion loss | Approximately 3.5 dB per output |
| Connector type | F-female connectors |
| Mounting | Wall or flat surface mounting points |
| Power supply | Not required, passive device |
| Dimensions | Approximately 85 x 45 x 25 mm |
| Weight | Approximately 90 g |
| Main function | Splits one antenna or satellite input into two outputs |
| Compatibility | Terrestrial TV, cable TV and satellite IF signals |
| Maintenance | Keep connectors dry and clean; check tightness regularly |
| Cleaning | Wipe with a dry cloth, do not use liquids |
| Safety | Designed for indoor use, keep away from moisture |
| Spare parts and repairability | No user-serviceable parts; replace the unit if damaged |
| General information | Supports 5-2400 MHz for multi-switch and satellite distribution |
Frequently Asked Questions - 5153 TELEVES
What is the Televes 5153 used for?
The Televes 5153 is a TV signal splitter that divides one incoming antenna, cable, or satellite signal into two outputs. It is commonly used to feed two televisions or receivers from the same wall outlet.
How many devices can I connect to the Televes 5153?
You can connect two output devices, for example two TVs, two satellite receivers, or one TV and one decoder. It provides one input and two outputs.
Does the Televes 5153 need a power supply?
No, the 5153 is a passive splitter. It does not require any external power source, which makes it easy to install in existing antenna systems.
Which frequency range does the Televes 5153 support?
It supports a frequency range of 5-2400 MHz. This covers terrestrial TV, cable TV and satellite intermediate frequency signals, so it works with most home distribution systems.
Can I use the Televes 5153 for satellite TV?
Yes, the wide frequency range up to 2400 MHz allows the splitter to pass satellite IF signals. Use it with appropriate F-connector cabling to maintain good signal quality.
What connectors are fitted on the Televes 5153?
The splitter is fitted with F-female connectors. You will need F-push or F-screw plugs on your coaxial cables, which are standard for TV and satellite installations.
Will I lose signal quality when using this splitter?
Every splitter introduces a small insertion loss, typically around 3.5 dB per output for a two-way model. To minimize loss, keep cable runs short and use good quality coaxial cable and connectors.
How should I install the Televes 5153?
Fix the splitter to a dry, stable surface, connect the incoming cable to the input port, then connect two cables to the output ports. Ensure all F connectors are hand-tightened and not strained.
How do I clean and maintain the splitter?
Wipe the housing with a dry, soft cloth and check the connectors for corrosion or looseness. Avoid water, cleaning sprays and abrasive products. If connectors are damaged, replace the unit.
Is the Televes 5153 repairable?
It has no user-serviceable parts. If the splitter loses signal or damages a connector, the safest solution is to replace the unit rather than attempt a repair, because internal faults may affect signal quality.
User questions about 5153 TELEVES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Splitter in PDF format for free! Find your manual 5153 - TELEVES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5153 by TELEVES.
USER MANUAL 5153 TELEVES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TELEVES
Model : 5153
Category : Splitter