ACP1600X - Doorbell ASPES - Free user manual and instructions
Find the device manual for free ACP1600X ASPES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless doorbell |
| Brand | Aspes |
| Model | ACP1600X |
| Receiver Quantity | 1 receiver unit |
| Transmitter Quantity | 1 push button |
| Transmission Range | Up to 300 meters in open field |
| Operating Frequency | 433 MHz |
| Number of Melodies | 36 selectable chimes |
| Volume Levels | 5 adjustable levels |
| Power Supply - Transmitter | 1 x 12V 23A battery |
| Power Supply - Receiver | AC 110-240V adapter included |
| Waterproof Rating | IP44 protection for outdoor button |
| LED Indicator | Red LED flash when button is pressed |
| Receiver Dimensions | Approx. 85 x 85 x 30 mm |
| Transmitter Dimensions | Approx. 46 x 66 x 18 mm |
| Total Weight | Approx. 200 g |
| Installation Method | Screw-mount or double-sided adhesive tape |
| Material | Durable ABS plastic |
| Maintenance | Clean with a soft, dry cloth |
| Safety | CE certified, low voltage operation |
| Spare Parts | Standard 12V batteries are replaceable |
Frequently Asked Questions - ACP1600X ASPES
How do I install the Aspes ACP1600X doorbell?
Attach the transmitter button outdoors using screws or adhesive tape. Plug the receiver into an indoor power socket. Press the button to test the connection.
Can the transmitter button be used outdoors?
Yes, the button has an IP44 rating, making it resistant to rain and splashes. Avoid submerging it in water.
What battery does the transmitter need?
The button uses a 12V 23A alkaline battery. Open the compartment, insert the battery with correct polarity, and close it securely.
How do I change the melody on the ACP1600X?
Press the melody button on the receiver repeatedly to cycle through the 36 built-in chimes. The receiver will play a preview of each selected melody.
How can I adjust the volume?
Use the volume control on the receiver side to select one of 5 levels, from low to high. Turn it to your preferred loudness.
What should I do if the doorbell does not work?
Check the battery in the transmitter and replace it if needed. Ensure the receiver is plugged in and not blocked. Also verify the range between units; thick walls may reduce the signal.
Can I add extra receivers to the ACP1600X?
No, this model is designed for a single receiver. However, you can pair the transmitter with other compatible Aspes receivers if specified in the manual.
Is the receiver battery-powered or plug-in?
The receiver is plug-in powered via an included AC adapter (110-240V). It also has a battery backup slot for 2 AAA batteries in case of power outage.
How do I clean the doorbell?
Disconnect the receiver from power. Wipe both units with a soft dry cloth. Do not use water or chemical cleaners, as they may damage the circuit.
Does the button have a light to indicate when pressed?
Yes, a red LED on the front of the button flashes whenever it is pressed, giving you visual confirmation that the signal has been sent.
User questions about ACP1600X ASPES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Doorbell in PDF format for free! Find your manual ACP1600X - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACP1600X by ASPES.
USER MANUAL ACP1600X ASPES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASPES
Model : ACP1600X
Category : Doorbell