Infiniton

SPLIT-3910JM - Air conditioner Infiniton - Free user manual and instructions

Find the device manual for free SPLIT-3910JM Infiniton in PDF.

📄 91 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Infiniton SPLIT-3910JM - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeSplit Air Conditioner
BrandInfiniton
ModelSPLIT-3910JM
Cooling Capacity3.91 kW (approx. 13,300 BTU/h)
Heating Capacity4.10 kW (approx. 14,000 BTU/h)
Power Supply220-240 V, 50 Hz
RefrigerantR32
Indoor Unit Dimensions770 x 250 x 205 mm
Outdoor Unit Dimensions700 x 500 x 250 mm
Indoor Unit Weight8.5 kg
Outdoor Unit Weight24 kg
Noise Level (Indoor)24 – 39 dB(A)
Noise Level (Outdoor)55 dB(A)
Airflow Rate400 m³/h
ModesCooling, Heating, Dehumidification, Fan
FilterAntibacterial washable filter
ControlRemote control with LCD display
Timer24-hour programmable timer
Energy EfficiencyA++ energy class
Special FeaturesSleep mode, Eco mode, Auto restart
MaintenanceClean filter every 2 weeks; service annually
SafetyOvervoltage protection, refrigerant leak detection
Spare PartsAvailable; repairability score 7.2/10

Frequently Asked Questions - SPLIT-3910JM Infiniton

How do I install the Infiniton SPLIT-3910JM air conditioner?
Installation should be done by a qualified technician. Follow the owner's manual for refrigerant piping, electrical connections, and mounting.
What is the recommended temperature setting for cooling?
For optimal comfort and energy savings, set the temperature between 24°C and 26°C. Avoid setting it too low to reduce power consumption.
How often should I clean the air filter?
Clean the air filter every two weeks under normal use. More frequently in dusty environments. A clogged filter reduces efficiency.
What does the Eco mode do?
Eco mode optimises the operation to save energy by adjusting the compressor and fan speeds while maintaining a comfortable temperature.
How do I use the timer function?
Use the remote control to program the unit to turn ON or OFF at a specific time. The timer can be set for up to 24 hours in advance.
What should I do if the air conditioner is not cooling?
Check the air filter, ensure the setpoint is lower than room temperature, and verify that the remote control has batteries. If the issue persists, contact service.
Is the unit suitable for a room of 15 m²?
Yes, with a cooling capacity of 3.91 kW, the SPLIT-3910JM is designed for rooms up to approximately 30 m² depending on insulation and sunlight.
How do I switch between cooling and heating modes?
Press the MODE button on the remote control until the sun or snowflake symbol appears. The unit will then run in heating or cooling mode.
What refrigerant is used and is it environmentally friendly?
The unit uses R32 refrigerant, which has a lower Global Warming Potential (GWP) compared to older refrigerants like R410A.
How do I access the energy-saving settings?
Press the ECO button on the remote control to activate energy-saving mode. This automatically adjusts temperature and fan speed to reduce energy consumption.

User questions about SPLIT-3910JM Infiniton

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air conditioner in PDF format for free! Find your manual SPLIT-3910JM - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPLIT-3910JM by Infiniton.

USER MANUAL SPLIT-3910JM Infiniton

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Infiniton

Model : SPLIT-3910JM

Category : Air conditioner