SPLIT-2320MU - Air conditioner Infiniton - Free user manual and instructions
Find the device manual for free SPLIT-2320MU Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Split air conditioner |
| Brand | Infiniton |
| Model | SPLIT-2320MU |
| Product family | Air conditioner |
| Cooling capacity | 2.3 kW (approx. 8000 BTU/h) |
| Power supply | 220-240 V ~ 50 Hz |
| Cooling power consumption | 800 W (approx.) |
| Indoor unit dimensions | 770 x 250 x 190 mm |
| Outdoor unit dimensions | 700 x 500 x 250 mm |
| Indoor unit weight | 8 kg |
| Outdoor unit weight | 25 kg |
| Refrigerant | R32 |
| Operating modes | Cooling, Fan, Dry |
| Airflow volume | 400 m³/h (max) |
| Indoor noise level | 24 - 35 dB(A) |
| Outdoor noise level | 50 - 55 dB(A) |
| Temperature range | 16 °C - 30 °C |
| Timer | 24-hour programmable timer |
| Remote control | Included |
| Air filter | Washable dust filter |
| Maintenance | Clean filters every 2 weeks |
| Refrigerant piping | Pre-charged up to 5 m |
| Repairability | Standard spare parts available |
| General information | Designed for residential rooms up to 20 m² |
Frequently Asked Questions - SPLIT-2320MU Infiniton
How do I clean the air filter?
Turn off the unit and open the front panel. Slide out the filter and wash it with lukewarm water. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.
How often should I service the air conditioner?
It is recommended to have a professional service at least once a year. Check the refrigerant level and clean the coils to maintain efficiency.
What should I do if the remote control stops working?
First, replace the batteries. Make sure there is no obstruction between the remote and the sensor. If it still fails, reset the unit by unplugging it for a minute and plugging it back in.
What is the recommended temperature setting for energy saving?
Set the thermostat to 24°C - 26°C for cooling. This balances comfort and energy consumption. Use the timer to switch off when not needed.
Can I install the air conditioner myself?
Installation requires specialized skills for refrigerant lines and electrical connections. It is strongly advised to hire a certified technician to avoid damage or injury.
Why is the air conditioner not cooling properly?
Check if the filter is dirty, if the doors/windows are open, or if the outdoor unit is blocked. Ensure the set temperature is lower than room temperature. If still not working, contact a professional.
How do I set the timer on the remote?
Press the TIMER button on the remote. Use the + and - buttons to select the desired hours, then press TIMER again to confirm. The indicator light will show the timer is active.
What does the 'Dry' mode do?
Dry mode removes humidity from the air without heavy cooling. The fan runs at low speed, and the compressor cycles on and off to dehumidify the room gently.
How do I switch between cooling and fan mode?
Find the MODE button on the remote. Press it until the snowflake (cooling) or fan icon appears on the display. Wait a few seconds for the mode to activate.
What maintenance is needed for the outdoor unit?
Keep the outdoor unit clean and remove debris, leaves, or snow around it. Ensure there is at least 30 cm of clearance on all sides for proper airflow.
User questions about SPLIT-2320MU Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual SPLIT-2320MU - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPLIT-2320MU by Infiniton.
USER MANUAL SPLIT-2320MU Infiniton
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Infiniton
Model : SPLIT-2320MU
Category : Air conditioner