Separador Hidráulico 1 1/2” - Water pump Baxi - Free user manual and instructions
Find the device manual for free Separador Hidráulico 1 1/2” Baxi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hydraulic Separator (Low Loss Header) |
| Brand | Baxi |
| Model | Separador Hidráulico 1 1/2" |
| Connection Size | 1 1/2" BSP threaded |
| Max Operating Temperature | 110°C (230°F) |
| Max Operating Pressure | 6 bar (87 psi) |
| Flow Rate Capacity | Up to 3 m³/h |
| Material | Carbon steel with corrosion-resistant coating |
| Installation Orientation | Horizontal or vertical |
| Primary Connections | 2 x 1 1/2" female threaded |
| Secondary Connections | 2 x 1 1/2" female threaded |
| Automatic Air Vent | Included at top |
| Drain Valve | Included at bottom |
| Insulation | Removable foam shell available as accessory |
| Weight | 6 kg (13.2 lb) approx. |
| Dimensions (H × W × D) | 350 × 200 × 200 mm |
| Power Supply | None - passive hydraulic component |
| Primary Functions | Hydraulic separation, air elimination, dirt removal |
| Maintenance | Inspect and clean strainer (if fitted) every 6 months |
| Cleaning Instructions | Wipe exterior with damp cloth; avoid solvents and abrasives |
| Safety Features | Pressure relief compatible; operate within specified limits |
| Spare Parts | O-rings, gaskets, air vent, drain valve |
| Repairability | Serviceable - replaceable components by qualified technician |
Frequently Asked Questions - Separador Hidráulico 1 1/2” Baxi
What is a hydraulic separator and how does it work?
A hydraulic separator, also known as a low loss header, is a device used in hydronic heating systems to decouple the boiler circuit from the system circuit. It allows each circuit to operate with its own pump while maintaining hydraulic balance, preventing flow interference and improving overall efficiency.
How do I install the Separador Hidráulico 1 1/2"?
Install the separator in a vertical or horizontal position between the boiler and the heating system. Connect the primary (boiler) pipes to the top or side taps and the secondary (system) pipes to the opposite side. Ensure proper thread sealing and check for leaks before commissioning.
What are the recommended maintenance intervals?
Inspect the separator every 6 months. Check the air vent for proper operation, clean the dirt pocket or strainer at the bottom, and verify that all connections remain tight. If the unit is equipped with a magnetic filter, clean it according to the manufacturer's guidelines.
Can I use this separator with a Baxi boiler?
Yes, the Separador Hidráulico 1 1/2" is fully compatible with Baxi boilers and most other brands. It is designed for use in residential and light commercial heating systems with up to 3 m³/h flow. Always verify the system pressure and temperature are within the unit's specified limits.
What is the maximum system pressure and temperature?
The maximum operating pressure is 6 bar (87 psi) and the maximum operating temperature is 110°C (230°F). Exceeding these values can damage the separator and compromise system safety. Install appropriate pressure relief valves if needed.
How do I bleed air from the separator?
The separator includes an automatic air vent at the top. Simply open the bleed screw slightly during system filling or when air accumulates. The automatic vent will release trapped air without manual intervention once the system is pressurised.
What is the flow rate capacity of this model?
The maximum recommended flow rate is 3 m³/h for optimal separation efficiency. At higher flows, the hydraulic separation may become less effective. The 1 1/2" connections are sized to match typical domestic heating loops.
Does the separator require a power supply?
No, it is a passive hydraulic component with no electrical parts. It operates solely on the fluid pressure and flow generated by the system pumps. This makes it reliable and energy-efficient.
What connections are needed for installation?
The unit has four 1 1/2" BSP female threaded connections. Two are for the primary (boiler) circuit and two for the secondary (heating) circuit. You will need compatible threaded couplings, or you can adapt to different pipe sizes with suitable reducers.
How do I clean and maintain the separator?
For external maintenance, wipe with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners or solvents. Periodically open the drain valve to flush out any accumulated sludge. If a removable strainer is installed, clean it under running water.
User questions about Separador Hidráulico 1 1/2” Baxi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual Separador Hidráulico 1 1/2” - Baxi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Separador Hidráulico 1 1/2” by Baxi.
USER MANUAL Separador Hidráulico 1 1/2” Baxi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Baxi
Model : Separador Hidráulico 1 1/2”
Category : Water pump