ASA 3000-IN - Water heaters and boilers Baxi - Free user manual and instructions
Find the device manual for free ASA 3000-IN Baxi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas-fired wall-mounted boiler for central heating and domestic hot water |
| Brand | Baxi |
| Model | ASA 3000-IN |
| Energy Source | Natural gas (G20) / LPG (G31) with conversion kit |
| Nominal Power Input | 24 kW |
| Nominal Power Output | 21.6 kW (modulating) |
| Efficiency | Up to 90% on condensing operation |
| Heating Output | 24 kW for central heating and domestic hot water |
| Hot Water Flow Rate | 9.8 L/min at ΔT=30°C |
| Boiler Type | Sealed combustion chamber |
| Flue Type | Coaxial horizontal/vertical (Ø 60/100 mm) |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 28 kg |
| Installation | Wall-mounted, indoor installation |
| Control | Electronic with digital display |
| Safety Features | Overheat protection, flame detection, low water pressure sensor |
| Maintenance | Annual service recommended by certified technician |
| Spare Parts | Available through authorized Baxi dealers |
| Noise Level | < 50 dB(A) at full load |
| Max Water Pressure | 3 bar |
| Expansion Vessel Capacity | 8 L |
Frequently Asked Questions - ASA 3000-IN Baxi
What type of gas does the Baxi ASA 3000-IN use?
The Baxi ASA 3000-IN is designed for natural gas (G20) and can be converted to LPG (G31) using the appropriate conversion kit.
What is the recommended heating output for my home?
The ASA 3000-IN provides up to 24 kW of heating power, which is suitable for small to medium-sized homes with adequate insulation.
Can I install this boiler myself?
No, installation must be performed by a certified gas engineer to ensure compliance with local safety regulations and manufacturer warranty.
How do I reset the boiler after a fault?
Press and hold the reset button on the control panel for 3 seconds. If the error persists, consult the troubleshooting section of the manual or contact a service technician.
What is the ideal water pressure for the system?
The recommended water pressure when cold is between 1 and 1.5 bar. Pressure above 3 bar may trigger safety relief.
How often should I service the boiler?
You should have the boiler serviced annually by a registered engineer to maintain efficiency and safety.
Can I use the boiler if the pressure drops too low?
No, a pressure below 0.5 bar may prevent the boiler from operating. Re-pressurize the system via the filling loop until the gauge reads 1–1.5 bar.
Why is the hot water temperature fluctuating?
Fluctuations can be caused by scale build-up in the heat exchanger, incorrect gas pressure, or a faulty thermistor. Check the manual or call a professional.
Does the ASA 3000-IN have a built-in thermostat?
Yes, it includes a modulating thermostat and supports connection to an external room thermostat for improved comfort and energy savings.
Are spare parts readily available for this model?
Yes, genuine Baxi spare parts are available through authorized distributors and can be ordered online or from local service centers.
User questions about ASA 3000-IN Baxi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual ASA 3000-IN - Baxi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASA 3000-IN by Baxi.
USER MANUAL ASA 3000-IN Baxi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Baxi
Model : ASA 3000-IN
Category : Water heaters and boilers