ASC 1000/250 E - Water heaters and boilers Baxi - Free user manual and instructions
Find the device manual for free ASC 1000/250 E Baxi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water heater and boiler |
| Brand | Baxi |
| Model | ASC 1000/250 E |
| Capacity | 250 liters |
| Power Supply | 230 V ~ 50 Hz |
| Rated Power | 1500 W |
| Dimensions (H x W x D) | 1000 x 500 x 500 mm |
| Weight | 50 kg |
| Max Temperature | 75 °C |
| Energy Efficiency Class | C |
| Material | Enameled steel |
| Heating Element | Immersion heater |
| Control | Thermostat with indicator light |
| Safety | Overheat protection, pressure relief valve |
| Installation | Wall-mounted vertical |
| Maintenance | Periodic descaling, anode check |
| Cleaning | Wipe with damp cloth, no abrasives |
| Spare Parts | Thermostat, heating element, anode |
| Warranty | 2 years |
Frequently Asked Questions - ASC 1000/250 E Baxi
How do I install the Baxi ASC 1000/250 E water heater?
Installation must be carried out by a qualified professional. Ensure the wall is strong enough to support the weight (50 kg when empty). Connect to cold water supply and electrical circuit (230V/16A). Refer to the manual for detailed steps.
What is the recommended temperature setting for the thermostat?
For optimal energy efficiency and safety, set the thermostat between 60°C and 65°C. This prevents bacterial growth while avoiding scalding.
How often should I descale the water heater?
Descaling frequency depends on water hardness. In areas with hard water, descaling is recommended every 6 months. Use a descaling agent compatible with enameled steel.
What does the indicator light on the unit signify?
The indicator light shows the heating status. When lit, the heating element is active. When off, the water has reached the set temperature or the unit is in standby.
How can I reduce energy consumption with this water heater?
Set the thermostat to 60°C, insulate hot water pipes, and use timers if available. Regular maintenance (descaling, anode check) also improves efficiency.
What safety features does the Baxi ASC 1000/250 E have?
It includes overheat protection and a temperature/pressure relief valve. The safety valve automatically releases water if pressure or temperature exceeds safe limits.
How long does it take to heat a full tank?
With a 1500W heating element, it takes approximately 4-5 hours to heat 250 liters from 15°C to 60°C. Actual time may vary based on incoming water temperature.
What should I do if water is leaking from the pressure relief valve?
Small drips during heating are normal due to expansion. If continuous leaking occurs, check the valve or expansion tank. Contact a technician if needed.
How do I replace the sacrificial anode?
The anode is located at the top of the heater. Drain the tank, unscrew the old anode, and install a new one. It is recommended to replace every 2-3 years.
Can the Baxi ASC 1000/250 E be used for space heating (boiler)?
This model is primarily a water heater for domestic hot water, not a boiler for central heating. For space heating, a different Baxi boiler model is required.
User questions about ASC 1000/250 E Baxi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual ASC 1000/250 E - Baxi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASC 1000/250 E by Baxi.
USER MANUAL ASC 1000/250 E Baxi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Baxi
Model : ASC 1000/250 E
Category : Water heaters and boilers