AS 1500-IN E - Chauffe-eau et chaudière Baxi - Free user manual and instructions
Find the device manual for free AS 1500-IN E Baxi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas instantaneous water heater |
| Brand | Baxi |
| Model | AS 1500-IN E |
| Energy Source | Natural gas or LPG (convertible) |
| Installation Type | Wall-mounted, indoor |
| Dimensions (H x W x D) | 700 mm x 400 mm x 300 mm |
| Weight | 15 kg |
| Thermal Power (max) | 24 kW |
| Hot Water Flow Rate | 10 L/min at 35°C rise |
| Minimum Water Pressure | 0.2 bar |
| Maximum Water Pressure | 8 bar |
| Gas Connection | 1/2" BSP |
| Water Connections | 1/2" BSP (cold in, hot out) |
| Flue Type | Balanced flue (room sealed) |
| Ignition Type | Electronic, battery powered |
| Temperature Control | Manual gas valve with temperature range 40-60°C |
| Safety Features | Flame failure device, overheat protection, freeze protection |
| Maintenance | Annual service by qualified technician; clean water filter regularly |
| Spare Parts Availability | Thermocouple, gas valve, water valve, burner assembly available through Baxi distributors |
| Repairability | Modular design, many parts replaceable |
Frequently Asked Questions - AS 1500-IN E Baxi
What type of gas does the Baxi AS 1500-IN E use?
The Baxi AS 1500-IN E is designed for natural gas but can be converted to LPG with a conversion kit. Always consult a qualified installer.
How do I adjust the water temperature?
Turn the gas control knob located on the front panel to adjust the temperature. The recommended setting is between 40°C and 60°C for safe use.
What should I do if the heater does not ignite?
Check that the gas supply is open, the batteries in the ignition are fresh, and the water pressure is sufficient (minimum 0.2 bar). If problems persist, contact a technician.
Can the Baxi AS 1500-IN E be installed outdoors?
No, this model is designed for indoor installation only. It requires a balanced flue to the outside for combustion air and exhaust.
How often should I service the water heater?
Annual servicing by a Gas Safe registered engineer is recommended to ensure safe and efficient operation.
What is the minimum water pressure required?
The minimum operating water pressure is 0.2 bar. If your mains pressure is lower, a booster pump may be required.
How do I clean the water filter?
Turn off water and gas supply, unscrew the inlet connection, remove the filter mesh, rinse under running water, and reinstall.
What does the error light mean?
A flashing red light typically indicates a flame failure or overheat condition. Reset by turning off the unit for 5 minutes. If it persists, call a technician.
Is the Baxi AS 1500-IN E compatible with solar pre-heat?
Yes, it can be used with pre-heated water from solar panels, but the inlet temperature must not exceed 60°C to avoid damage.
Where can I find spare parts for this model?
Spare parts are available from Baxi authorized distributors or online retailers. Always use genuine Baxi parts for safety and warranty.
User questions about AS 1500-IN E Baxi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chauffe-eau et chaudière in PDF format for free! Find your manual AS 1500-IN E - Baxi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS 1500-IN E by Baxi.