SWI-150 - Network card Steren - Free user manual and instructions
Find the device manual for free SWI-150 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network interface card (NIC) for desktop computers |
| Brand | Steren |
| Model | SWI-150 |
| Interface type | PCI 32-bit bus |
| Network standard | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX |
| Data transfer rate | 10/100 Mbps with auto-negotiation |
| Connector | One RJ-45 Ethernet port |
| Bus compatibility | PCI 2.2 / 2.3 slots, 3.3 V and 5 V |
| Indicator LEDs | Power, Link, and Activity status lights |
| Operating systems supported | Windows, Linux, and other major operating systems with NDIS drivers |
| Plug and Play support | Yes, automatic resource assignment |
| Dimensions | 12.0 x 8.0 x 1.5 cm (approx.) |
| Weight | 80 g (approx.) |
| Power source | Powered directly through the PCI slot |
| Operating temperature | 0 °C to 50 °C |
| Storage temperature | -20 °C to 70 °C |
| Humidity range | 10 % to 90 % non-condensing |
| Maintenance | Clean the card with a soft, dry antistatic cloth when powered off |
| Safety precautions | Use anti-static protection during installation; keep away from water and excessive heat |
| Spare parts and repairability | No customer-serviceable internal parts; contact Steren support for replacement |
| General information | Includes auto MDI/MDIX sensing and Wake-on-LAN header |
Frequently Asked Questions - SWI-150 Steren
What is the Steren SWI-150 network card used for?
The Steren SWI-150 is a wired network interface card that adds Fast Ethernet connectivity to a desktop computer. It allows you to connect to a router, switch, or modem using a standard Ethernet cable.
How do I install the SWI-150 in my computer?
Turn off the computer, unplug it, and open the case. Insert the card into a free PCI slot, secure it with the bracket screw, and close the case. Power on the computer; the system should detect the card and install drivers automatically.
Does the SWI-150 support 100 Mbps internet speeds?
Yes, the card supports 10/100 Mbps, with auto-negotiation for both speed and duplex mode. For full performance, make sure your router and Ethernet cable are rated for Fast Ethernet (Category 5 or higher).
Is the SWI-150 compatible with Windows 10?
The card works under Windows 10 and earlier versions. In most cases, Windows loads a built-in generic driver automatically. If not, download the Steren driver from the official support page.
What do the LEDs on the SWI-150 indicate?
The card usually has two LEDs: a link LED that lights when a valid network connection is established, and an activity LED that blinks during data transmission. Some models also include a power LED.
Can I use the SWI-150 in a laptop?
No, the SWI-150 is a PCI add-on card designed for desktop computers with an available internal PCI slot. For laptops, consider a USB or ExpressCard network adapter instead.
Does the SWI-150 support plug and play?
Yes, it is Plug and Play. The system automatically assigns system resources such as interrupt request (IRQ) and I/O addresses. You may only need to insert the CD or download drivers for certain operating systems.
How should I clean and maintain the SWI-150?
Disconnect the computer from power and remove the card before cleaning. Use a soft, dry cloth or compressed air to remove dust from the circuit board and connectors. Avoid liquids and harsh chemicals. Do not touch the gold contacts with bare fingers.
What safety precautions should I follow during installation?
Protect the card from electrostatic discharge by wearing an anti-static wrist strap or touching a grounded metal surface before handling. Do not force the card into a slot, and keep the card away from moisture and high temperatures.
Is the SWI-150 repairable if it fails?
The SWI-150 contains no user-serviceable parts. If the card stops working, check the slot and cable first. If the problem persists, contact Steren technical support or consider replacing the card, as internal chip-level repair is not recommended.
User questions about SWI-150 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual SWI-150 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWI-150 by Steren.
USER MANUAL SWI-150 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : SWI-150
Category : Network card