L5060GSTRC - Tractor KUBOTA - Free user manual and instructions
Find the device manual for free L5060GSTRC KUBOTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tractor |
| Brand | Kubota |
| Model | L5060GSTRC |
| Engine Power | 50 hp (37.3 kW) |
| Engine Type | 4-cylinder, 4-stroke liquid-cooled diesel |
| Transmission | Glide Shift Transmission (GST), 24F/24R |
| Drive System | 4WD with mechanical front-wheel drive |
| PTO Speed | 540 & 540E rpm, independent |
| Hydraulic Pump Output | 6.3 gpm (23.8 L/min) |
| 3-Point Hitch | Category 1 |
| Lift Capacity | 2,900 lb (1,315 kg) |
| Wheelbase | 68.3 in (173.5 cm) |
| Overall Length | 126.8 in (322.0 cm) |
| Overall Width | 58.3 in (148.0 cm) |
| Overall Height (ROPS) | 88.6 in (225.0 cm) |
| Weight | 3,900 lb (1,769 kg) |
| Fuel Tank Capacity | 13.2 gal (50 L) |
| Electrical System | 12V |
| Steering | Power steering |
| Tire Size Front | 7-16 |
| Tire Size Rear | 13.6-26 |
| Warranty | 3 years / 2,500 hours limited |
Frequently Asked Questions - L5060GSTRC KUBOTA
How do I start the Kubota L5060GSTRC tractor?
Ensure the PTO is disengaged, the range lever is in neutral, and the parking brake is set. Turn the key to the glow position for 5 seconds, then start the engine. Always release the key once the engine catches.
What fuel type should I use for the L5060GSTRC?
Use ultra-low-sulfur diesel fuel with a cetane rating of 45 or higher. Avoid biodiesel blends above B20 unless approved by Kubota.
How often should I change the engine oil?
Change the engine oil and filter every 100 hours or once a year, whichever comes first. Use Kubota-approved 15W-40 engine oil.
What is the recommended tire pressure?
Front tires should be at 20 psi and rear tires at 18 psi for normal field operations. Check pressures when tires are cold.
How do I operate the PTO?
Set the engine speed to 540 rpm with the PTO switch. Engage the PTO at low idle, then increase to rated rpm. Never engage the PTO with an attached implement under heavy load.
What pre-operation checks should I perform daily?
Check engine oil level, coolant level, fuel level, tire pressure, and look for leaks. Clean the radiator screen and verify that all safety shields are in place.
How do I attach an implement to the 3-point hitch?
Align the hitch points, raise the 3-point lift, and connect the lower links first. Attach the top link and secure the PTO shaft. Always use locking pins and check for proper clearance.
What does the red oil pressure light mean?
If the red oil pressure light stays on, stop the engine immediately. Low oil pressure can cause severe engine damage. Check the oil level and pressure switch.
How should I store the tractor for an extended period?
Clean the tractor, run the engine with fuel stabilizer for a few minutes, disconnect the battery, and protect exposed cylinders and contacts. Store in a dry place.
Can the L5060GSTRC be used in cold weather?
Yes, use the coolant heater and a block heater if available. Use summer-grade fuel adjusted for winter and ensure the battery is fully charged.
User questions about L5060GSTRC KUBOTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tractor in PDF format for free! Find your manual L5060GSTRC - KUBOTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L5060GSTRC by KUBOTA.