L4060HSTRC - Tractor KUBOTA - Free user manual and instructions
Find the device manual for free L4060HSTRC KUBOTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Utility Tractor |
| Model | L4060HSTRC |
| Engine Power | 40.0 HP (29.8 kW) |
| Engine Type | 4-cylinder diesel, liquid-cooled |
| Displacement | 1.8 L (110 cu in) |
| Transmission | Hydrostatic (HST) with cruise control |
| Number of Gears | Infinitely variable (HST) |
| PTO Power | 32.5 HP (24.2 kW) at rear |
| PTO Speed | 540/1000 rpm rear, 2000 rpm mid |
| Hydraulic System Capacity | 11.0 gal (41.6 L) |
| 3-Point Hitch Lift Capacity | 1,500 lbs (680 kg) at 24 in behind |
| Fuel Tank Capacity | 10.6 gal (40 L) |
| Overall Length | 112.0 in (284 cm) |
| Overall Width | 54.0 in (137 cm) |
| Overall Height | 80.0 in (203 cm) with ROPS |
| Weight | 2,755 lbs (1,250 kg) |
| Tire Size (Front) | 27x8.5-15 |
| Tire Size (Rear) | 43x16-20 |
| Steering Type | Power steering |
| Brakes | Wet disc brakes |
| ROPS | Foldable roll-over protective structure |
| Engine Oil Capacity | 6.3 qt (6.0 L) |
| Coolant Capacity | 8.5 qt (8.0 L) |
| Maintenance Interval (Engine Oil) | Every 150 hours or annually |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - L4060HSTRC KUBOTA
What engine oil type does the Kubota L4060HSTRC require?
Use Kubota genuine engine oil or API service category CJ-4 or higher, SAE 10W-30 or 15W-40 depending on ambient temperature. Always check the operator's manual for the latest recommendations.
How often should I change the hydraulic oil filter?
Replace the hydraulic oil filter every 400 hours of operation or annually, whichever comes first. Use a genuine Kubota filter for best performance.
What is the correct tire pressure for the L4060HSTRC?
Front tires: 30-35 psi (2.1-2.4 bar). Rear tires: 20-25 psi (1.4-1.7 bar). Adjust based on load and working conditions. Check pressure when tires are cold.
How do I engage the PTO on this tractor?
The PTO is engaged by moving the PTO lever located on the right fender. Ensure the engine speed is at idle and the transmission is in neutral. Slowly increase engine speed to 540 or 1000 rpm as needed.
What is the towing capacity of the L4060HSTRC?
The maximum towing capacity is approximately 2,000 lbs (907 kg) for trailers with brakes. Always use a properly sized drawbar and safety chains.
How do I check the transmission fluid level?
Park the tractor on level ground, lower the implements, and engage the parking brake. With the engine running and transmission warm, remove the dipstick located near the left rear wheel. Wipe it, reinsert, and check the level; it should be in the crosshatched area.
Can I use this tractor with a front-end loader?
Yes, the L4060HSTRC is compatible with Kubota's LA1150 or similar front-end loader. Ensure the loader is properly installed and the counterweight is used to maintain stability.
What should I do if the engine won't start?
Check the safety switches: ensure the PTO is disengaged, transmission in neutral, seat switch activated, and brake pedal pressed. Also verify battery voltage and fuel supply.
How do I adjust the seat for comfort?
The seat has a slide adjustment lever underneath the front edge. Pull the lever to move the seat forward or backward. For height adjustment, use the knob on the left side of the seat pedestal.
Where can I find the chassis serial number?
The serial number is stamped on a metal plate located on the right side of the transmission housing, near the rear axle. It is essential for ordering parts and warranty service.
User questions about L4060HSTRC KUBOTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tractor in PDF format for free! Find your manual L4060HSTRC - KUBOTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L4060HSTRC by KUBOTA.