WHIRLPOOL

AWM 290/3 - Washing machine WHIRLPOOL - Free user manual and instructions

Find the device manual for free AWM 290/3 WHIRLPOOL in PDF.

📄 17 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice WHIRLPOOL AWM 290/3 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Washing machine
Brand Whirlpool
Model AWM 290/3
Capacity 5 kg
Spin Speed 800 rpm (selectable)
Dimensions (H × W × D) 85 cm x 60 cm x 60 cm
Weight 72 kg
Power Supply 220–240 V, 50 Hz
Energy Efficiency Class B (based on older EU energy label)
Washing Programs Cotton, Synthetics, Delicates, Wool, Quick 30'
Temperature Range Cold to 90 °C
Water Consumption per Cycle Approximately 49 litres
Control Type Mechanical timer with rotary program selector
Display Indicator lights for cycle status
Drum Material Stainless steel
Anti-Flood System Built-in overflow protection
Water Level Control Automatic load sensor
Average Noise Level 62 dB during wash, 78 dB during spin
Installation Freestanding, requires standard 3/4" tap
Door Opening 180° door hinge for easy loading
Warranty 2 years

Frequently Asked Questions - AWM 290/3 WHIRLPOOL

What should I do if the washing machine does not spin?
Check if the drum is overloaded and redistribute laundry. Ensure the spin speed is not set to zero. If problem persists, clean the drain pump filter and check the drain hose for kinks.
How can I descale the appliance?
Run an empty cycle at 90°C with a descaling agent or white vinegar. Remove any visible scale from the heating element and drum afterwards.
Is it safe to wash a down duvet?
Yes, if it has a wash care label. Use the delicates program at 30°C with a light spin (max 800 rpm) and a reduced load. Rinse thoroughly.
What is the recommended way to install the machine?
Position the washer on a level surface, connect the inlet hose to a 3/4" tap, and attach the drain hose to a standpipe or sink. Remove transit bolts before first use.
Why is the laundry still wet after spinning?
The spin speed may be too low, or the pump filter is blocked. Also check that the drain hose isn't elevated too high. Regular maintenance of the drain pump prevents this.
How do I clean the door seal to prevent mould?
Wipe the door gasket with a damp cloth after each wash. Pull back the rubber lip to remove trapped objects. Run a hot wash regularly with empty drum to prevent mildew.
Can I use liquid detergent with this machine?
Yes, liquid detergent can be used, but it is best to use a detergent ball if you use the pre-wash compartment. Some models may have a special insert for liquid detergent in the drum.
How do I reset the washing machine?
Turn the program selector to Off and unplug the appliance for 10 minutes. Plug it back in and select the desired program. This clears temporary electronical faults.
What does flashing water tap indicator mean?
It indicates a water supply problem. Check that the tap is fully open, the inlet hose isn't kinked, and the water pressure is sufficient. Clean the inlet filters.
How much laundry can I load per wash?
The rated capacity is 5 kg. It's recommended to load 4.5 kg for cotton to achieve the best cleaning results without wearing out the machine.

User questions about AWM 290/3 WHIRLPOOL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Washing machine in PDF format for free! Find your manual AWM 290/3 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWM 290/3 by WHIRLPOOL.

USER MANUAL AWM 290/3 WHIRLPOOL

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : WHIRLPOOL

Model : AWM 290/3

Category : Washing machine