AWM 5086 - Washing machine WHIRLPOOL - Free user manual and instructions
Find the device manual for free AWM 5086 WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Whirlpool |
| Model | AWM 5086 |
| Installation Type | Freestanding |
| Loading Type | Front Load |
| Load Capacity | 6 kg |
| Spin Speed | 1200 rpm |
| Display Type | LED |
| Number of Programs | 15 (cotton, synthetics, delicates, wool, quick wash) |
| Temperature Control | Cold to 90°C |
| Energy Efficiency Class | B |
| Water Consumption (per cycle) | 49 L |
| Width | 600 mm |
| Depth | 520 mm |
| Height | 850 mm |
| Weight | 65 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2000 W |
| Water Pressure | 0.1-1 MPa |
| Noise Level (Wash) | 58 dB |
| Noise Level (Spin) | 76 dB |
| Functions | Delay Start, Quick Wash, Rinse Hold, Easy Iron |
| Safety Features | Child Lock, Overheat Protection, Unbalanced Load Detection |
| Cleaning & Maintenance | Self-cleaning detergent drawer, accessible drain pump filter |
| Spare Parts Availability | Door seal, heating element, pump, control board via Whirlpool service |
Frequently Asked Questions - AWM 5086 WHIRLPOOL
How do I properly install my Whirlpool AWM 5086 washing machine?
Place the machine on a level and firm surface. Remove everything from the drum and remove the transit bolts on the back. Connect the water hose to the cold water supply with a pressure of 0.1-1 MPa, and the drain hose to the standpipe. Plug into a grounded outlet.
Can I use hot water connection instead of cold?
The AWM 5086 is designed for cold water supply only. Using hot water can damage the detergent dispenser and affect wash results.
Why does my machine vibrate during the spin cycle?
Make sure the transit bolts are removed and the machine is level. Check that the floor is solid and the rubber feet are adjusted if necessary. Also, avoid overloading.
How do I clean the detergent drawer?
Press the release tab and pull out the drawer. Rinse it under warm water and use a soft brush to remove residues. Clean the recess with a damp cloth. Reassemble after drying.
What is the maximum load for a cotton cycle?
For cotton, the maximum load is 6 kg. For synthetics, it is about 3 kg, and for delicates, 2 kg. Overloading can cause poor washing and damage.
How do I use the Delay Start function?
Select a program, then press the Delay Start button to delay the start by 1 to 24 hours in one-hour increments. Press Start/Pause. The machine will start automatically.
How often should I clean the drain pump filter?
You should clean the drain pump filter every 2 to 3 months, or immediately if the machine fails to drain. Open the lower cover, unscrew the filter, and remove lint and debris.
Why is my machine not spinning properly?
Check that the spin speed is set correctly. Also, ensure the load is balanced. If the machine detects imbalance, it will reduce spin speed. Clean the drain filter if blocked.
Where can I find the spare parts for this model?
Genuine spare parts such as the door seal, heater, pump, and control board are available through Whirlpool authorized service centers. Use the model number AWM 5086 when ordering.
What does the 'E01' error code mean?
E01 indicates a problem with the door interlock. Check if the door is closed properly. If the issue persists, contact a technician.
User questions about AWM 5086 WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual AWM 5086 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWM 5086 by WHIRLPOOL.
USER MANUAL AWM 5086 WHIRLPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WHIRLPOOL
Model : AWM 5086
Category : Washing machine