RNX-N4PS - Router Rosewill - Free user manual and instructions
Find the device manual for free RNX-N4PS Rosewill in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wireless N Router |
| Brand | Rosewill |
| Model | RNX-N4PS |
| Wireless standard | IEEE 802.11 b/g/n |
| Frequency band | 2.4 GHz |
| Maximum wireless speed | 150 Mbps |
| Number of LAN ports | 4 x 10/100 Mbps |
| Number of WAN ports | 1 x 10/100 Mbps |
| Antennas | 2 x 5 dBi external, detachable |
| Security features | WEP, WPA, WPA2-PSK encryption |
| Dimensions (approx.) | 160 x 120 x 33 mm (6.2 x 4.7 x 1.3 in) |
| Weight (approx.) | 280 g (0.62 lb) |
| Power supply | 9V DC, 0.6A |
| Main functions | Internet sharing, wireless access point, built-in 4-port switch, NAT firewall, DHCP server |
| Maintenance and cleaning | Disconnect power before cleaning; wipe with a soft dry cloth; keep away from water and dust. |
| Safety certifications | FCC, CE, RoHS |
| Spare parts and repairability | No user-serviceable parts inside; contact Rosewill support for repairs. |
Frequently Asked Questions - RNX-N4PS Rosewill
How do I set up the Rosewill RNX-N4PS router?
Connect the router to your modem, power it on, then open a web browser and go to http://192.168.1.1. Follow the quick setup wizard. For detailed steps, see the user manual.
What is the default IP address and login credentials?
The default IP is 192.168.1.1, with username "admin" and password "admin". You should change these after first login.
How can I reset the router to factory defaults?
Use a paperclip to press and hold the reset button on the back of the router for about 10 seconds while powered on. The router will reboot with default settings.
How do I change the WiFi password?
Access the web interface, go to Wireless settings, look for SSID and passphrase or WPA2 key. Enter a new password and save. Reconnect all devices with the new password.
Does the RNX-N4PS support WPA2 security?
Yes, it supports WEP, WPA, and WPA2-PSK encryption for enhanced wireless security.
Can I use this router as a wireless repeater?
The default firmware may not include a dedicated repeater mode. However, you can set it up as an access point by connecting its LAN port to your main router and disabling DHCP, assigning a static IP in the same subnet.
How do I port forward on this router?
Go to Advanced Setup > NAT > Virtual Server or Port Forwarding. Create a rule with the service port, IP address, and protocol (TCP/UDP). Ensure the device has a static IP or DHCP reservation.
What is the maximum wireless speed I can expect?
The router supports IEEE 802.11n with a maximum link rate of 150 Mbps. Real-world throughput will be lower, typically around 80-100 Mbps depending on distance and interference.
How do I update the firmware?
Download the latest firmware from Rosewill's website. In the router interface, go to Administrative > Firmware Upgrade. Upload the file and do not power off during the update.
Is the router compatible with all internet service providers?
It works with most cable, DSL, and fiber modems using an Ethernet WAN port. It supports PPPoE, Dynamic IP, and Static IP connections.
User questions about RNX-N4PS Rosewill
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual RNX-N4PS - Rosewill and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RNX-N4PS by Rosewill.
USER MANUAL RNX-N4PS Rosewill
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rosewill
Model : RNX-N4PS
Category : Router