RNX-AC750RT - Router Rosewill - Free user manual and instructions
Find the device manual for free RNX-AC750RT Rosewill in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Rosewill |
| Model | RNX-AC750RT |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | Dual-band (2.4 GHz + 5 GHz) |
| Maximum Wireless Speed | 750 Mbps (300 Mbps at 2.4 GHz + 433 Mbps at 5 GHz) |
| Antennas | 4 external 5 dBi antennas |
| Ethernet Ports | 4x 10/100/1000 LAN + 1x 10/100/1000 WAN |
| USB Port | 1x USB 2.0 for file sharing |
| Security Encryption | WEP, WPA, WPA2 |
| Additional Features | Guest network, QoS, parental control |
| Protocol Support | IPv4, IPv6 |
| Power Supply | DC 12V, 0.5A adapter |
| Dimensions (H x W x D) | 35 x 195 x 133 mm |
| Weight | 350 g |
| Temperature Range | 0°C to 40°C operating |
| Humidity Range | 10% to 90% non-condensing |
| Maintenance | Wipe with dry cloth; keep vents clear |
| Safety | Keep away from water and heat |
| Reparability | No user-serviceable parts; contact Rosewill support |
Frequently Asked Questions - RNX-AC750RT Rosewill
What is the default IP address and password for Rosewill RNX-AC750RT?
The default IP address is 192.168.1.1, with default username admin and password admin. After logging in, you should change the password for security.
How to reset the router to factory settings?
To reset the Rosewill RNX-AC750RT, press and hold the Reset button for about 10 seconds until the LEDs blink. This restores all settings to factory defaults.
How to change the Wi-Fi password?
Log in to the router's web interface, go to Wireless Settings, then modify the Pre-Shared Key in the WPA2 section. Click Save and reboot the router if needed.
What are the available frequency bands?
The router operates in dual-band mode: 2.4 GHz and 5 GHz. The 2.4 GHz band offers longer range, while the 5 GHz band provides higher throughput.
How to configure parental controls?
Access the router's admin page, navigate to Access Control or Parental Control, then input the MAC addresses of devices to restrict and set allowed browsing times.
Can I connect a USB drive for sharing?
Yes, the RNX-AC750RT includes a USB 2.0 port. Plug in a fat32 or ntfs-formatted USB drive and enable File Sharing in the USB settings menu.
How to update the firmware?
Go to the System Tools > Firmware Upgrade section, download the latest firmware from Rosewill's official website, upload the file, and click upgrade. Do not disconnect power during the update.
Why is my 5 GHz network not visible?
Make sure your device supports IEEE 802.11ac on 5 GHz. Also check that the band is enabled in Wireless Settings. Some routers hide the 5 GHz network if the channel is set to 'auto' - try choosing a specific channel like 36.
How to set up a guest network?
Log in to the router, go to Guest Network, enable it, and set a separate SSID with its own security key. This isolates guests from your main network.
What kind of power adapter does it require?
The router uses a DC 12V, 0.5A adapter with a 2.1mm barrel connector. Always use the included adapter to prevent damage.
User questions about RNX-AC750RT Rosewill
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual RNX-AC750RT - Rosewill and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RNX-AC750RT by Rosewill.
USER MANUAL RNX-AC750RT Rosewill
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rosewill
Model : RNX-AC750RT
Category : Router