TEW-821DAP2KAC - Access Point TRENDNET - Free user manual and instructions
Find the device manual for free TEW-821DAP2KAC TRENDNET in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | TRENDnet |
| Model | TEW-821DAP2KAC |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Max Wireless Speed | 300 Mbps (2.4 GHz) + 867 Mbps (5 GHz) |
| Ethernet Ports | 1 x Gigabit PoE+ port |
| PoE Support | Yes, IEEE 802.3at PoE+ |
| Wireless Security | WPA2-PSK, WPA2-Enterprise |
| Number of SSIDs | 8 (4 per radio) |
| MIMO | 2x2 MU-MIMO |
| Management | Web-based (HTTP/HTTPS), SNMP |
| Mounting Options | Ceiling mount, wall mount |
| Dimensions (W x D x H) | 161 x 161 x 38 mm |
| Weight | 250 g (per unit) |
| Power Input | PoE+ or 12V DC adapter |
| Package Includes | 2 x Access Points, mounting hardware, quick install guide |
| Warranty | 2 years |
| Operating Temperature | 0°C to 40°C |
| Certifications | FCC, CE |
Frequently Asked Questions - TEW-821DAP2KAC TRENDNET
How do I set up the TEW-821DAP2KAC access point?
Connect the access point to your network via an Ethernet cable, provide power via PoE+ or a 12V DC adapter, then open a web browser and navigate to the default IP address. Use the quick setup wizard to configure your wireless network.
Does this access point support Power over Ethernet?
Yes, the TEW-821DAP2KAC supports PoE+ (IEEE 802.3at), allowing you to power it with a PoE switch or injector without a separate power adapter.
What is the default IP address and login credentials?
The default IP address is often 192.168.10.100, with the username admin and password admin. You can reset to these defaults if needed.
Can I create multiple wireless networks with different SSIDs?
Yes, it supports up to 8 SSIDs (4 on the 2.4 GHz band and 4 on the 5 GHz band), so you can separate traffic for guests, IoT devices, or different user groups.
How do I update the firmware?
Download the latest firmware from the TRENDnet support website. Log into the web interface, go to the maintenance or upgrade section, and upload the file. Do not disconnect power during the upgrade.
What is the typical wireless coverage range?
In an open environment, the range can reach up to 100 meters indoors and 300 meters outdoors, but actual coverage depends on walls, interference, and the device used to connect.
Can this access point be used as a wireless bridge or repeater?
Yes, it supports multiple operation modes including Access Point, WDS Bridge, and Wireless Client (repeater) mode, allowing flexible network deployment.
Is the TEW-821DAP2KAC really a 2-pack?
Yes, the '2KAC' suffix indicates that the package includes two access points. Each unit can be configured independently or managed together for larger coverage.
How do I reset the access point to factory defaults?
While the device is powered on, press and hold the reset button for about 10 seconds with a paperclip or pin. Release it when the LED flashes, and the device will reboot with default settings.
What is the difference between this access point and a router?
A router connects different networks and provides routing, DHCP, and firewall functions. A wireless access point extends the wireless signal of an existing network. This unit is designed to be connected to a router or switch, not to replace your router.
User questions about TEW-821DAP2KAC TRENDNET
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual TEW-821DAP2KAC - TRENDNET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TEW-821DAP2KAC by TRENDNET.
USER MANUAL TEW-821DAP2KAC TRENDNET
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRENDNET
Model : TEW-821DAP2KAC
Category : Access Point