TEW-738APBO - Access Point TRENDNET - Free user manual and instructions
Find the device manual for free TEW-738APBO TRENDNET in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Access Point / CPE |
| Brand | TRENDnet |
| Model | TEW-738APBO |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Ethernet Port | 1 x 10/100 Mbps (PoE In) |
| Power Method | Power over Ethernet (PoE) 802.3af/at |
| Antenna Type | Built-in directional antenna |
| Antenna Gain | 10 dBi |
| Mounting | Pole or wall mount (bracket included) |
| Dimensions (W x D x H) | 260 x 80 x 35 mm (10.2 x 3.1 x 1.4 in) |
| Weight | 400 g (14.1 oz) |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% non-condensing |
| Wireless Security | WEP, WPA/WPA2-PSK, WPA2-Enterprise |
| Management | Web interface, Telnet, SNMP |
| LED Indicators | Power, LAN, WLAN |
| Weatherproof Rating | IP65 |
| Included Accessories | PoE injector, mounting kit, quick guide |
| Regulatory Certifications | FCC, CE |
Frequently Asked Questions - TEW-738APBO TRENDNET
How do I reset the TRENDnet TEW-738APBO to factory defaults?
Locate the reset button on the device. Press and hold it for about 10 seconds until the LEDs blink, then release. The device will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.10.100. The default username is admin and password is admin (or no password, depending on firmware). Check the label on the device.
Can I use this access point indoors?
Yes, it can be used indoors, but it is designed for outdoor use with an IP65 weatherproof rating. Indoors, ensure proper ventilation.
Does the TEW-738APBO support Power over Ethernet (PoE)?
Yes, it supports PoE 802.3af/at. A PoE injector is included in the package. Connect the injector between your switch and the device.
How to configure the TEW-738APBO as a point-to-point bridge?
Access the web interface, go to Wireless settings, and enable WDS (Wireless Distribution System). Enter the MAC address of the other device. Both devices must use the same channel and security settings.
What is the maximum range of this access point?
The range depends on environment. With the built-in 10 dBi directional antenna, it can cover up to 1 km (0.6 miles) in open outdoor areas with line-of-sight.
How can I update the firmware?
Download the latest firmware from the TRENDnet support website. Log into the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Does it support 5 GHz Wi-Fi?
No, the TEW-738APBO operates only on the 2.4 GHz band (802.11b/g/n). For dual-band, consider models like TEW-821DAP.
How to secure the wireless network?
In the web interface, go to Wireless Security. Select WPA2-PSK as the encryption, and enter a strong passphrase of at least 8 characters. Avoid using WEP as it is insecure.
What should I do if the device is not powering on?
Check the PoE injector and Ethernet cable connection. Ensure the power source is working. Try a different Ethernet cable. If the LED still does not light, the device may be defective.
User questions about TEW-738APBO TRENDNET
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual TEW-738APBO - TRENDNET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TEW-738APBO by TRENDNET.
USER MANUAL TEW-738APBO TRENDNET
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRENDNET
Model : TEW-738APBO
Category : Access Point