LX-1200 - Laminator BROTHER - Free user manual and instructions
Find the device manual for free LX-1200 BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laminator |
| Brand | Brother |
| Model | LX-1200 |
| Compatible Document Size | A4 / Letter (Max 230 mm width) |
| Max Pouch Thickness | 125 microns |
| Lamination Speed | Approx. 300 mm/min |
| Warm-Up Time | Approx. 3 minutes |
| Power Supply | AC 220-240V, 50/60Hz |
| Power Consumption | 250 W |
| Dimensions (W x D x H) | Approx. 340 x 130 x 95 mm |
| Weight | Approx. 1.2 kg |
| Safety Protection | Overheat protection and thermal fuse |
| Control Type | Switch with LED indicator |
| Roller Type | 2 rollers (cold and warm) |
| Cleaning | Wipe rollers with soft, dry cloth after cooling |
| Maintenance | Clean after every 20 laminations |
| Repairability | Replaceable rollers and heating element |
| Accessories Included | 2 laminating pouches |
| Recommended Pouch Size | A4 or Letter |
| Usage Environment | Indoor, dry locations |
Frequently Asked Questions - LX-1200 BROTHER
How do I use the Brother LX-1200 laminator?
Plug in the laminator, switch it on, and wait for the LED indicator to turn green. Place the document inside a compatible pouch, insert one edge into the feeder slot, and release it. The rollers will pull the pouch and seal it automatically.
What is the maximum pouch thickness for the LX-1200?
The LX-1200 supports pouches up to 125 microns thick. Using thicker pouches may cause jams or poor lamination quality.
Why does my laminator not power on?
Check that the power cord is properly connected and the outlet supplies power. If the thermal overload protection has tripped, unplug the unit, wait 30 minutes, then try again.
How do I clear a jam in the laminator?
Turn off and unplug the machine immediately. Let it cool down, then carefully pull the pouch out using light, steady pressure. Never pull forcibly while the rollers are hot.
Can I laminate photos with this device?
Yes, as long as the photo fits within an A4/Letter pouch and the total thickness does not exceed 125 microns. Use a sealable, photo-safe pouch for best results.
How should I clean the LX-1200 laminator?
After use and once cooled, wipe the rollers with a soft, lint-free cloth slightly dampened with water. Allow the rollers to dry completely before the next use.
How long does it take to warm up?
The laminator reaches working temperature in about 3 minutes. The built-in LED will indicate when it is ready.
Does this laminator work with cold pouches?
The LX-1200 is primarily a thermal laminator and requires heat-activated laminating pouches. Cold pouches are not recommended for this model.
What should I do if the lamination comes out with bubbles or wrinkles?
Make sure the pouch is correctly positioned and that you wait for the unit to fully warm up. Use a fresh pouch, as contaminated or damaged pouches can cause imperfections.
Is maintenance or part replacement possible?
Yes, the rollers and heating element are designed to be replaceable. Contact an authorized Brother service center for spare parts and repair.
User questions about LX-1200 BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laminator in PDF format for free! Find your manual LX-1200 - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-1200 by BROTHER.
USER MANUAL LX-1200 BROTHER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROTHER
Model : LX-1200
Category : Laminator