HE-1101 - Surveillance Camera IDIS - Free user manual and instructions
Find the device manual for free HE-1101 IDIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | IP Surveillance Camera |
| Brand | IDIS |
| Model | HE-1101 |
| Resolution | Full HD 1080p (1920x1080) |
| Frame Rate | 30 fps |
| Image Sensor | 1/2.8-inch CMOS sensor |
| Lens | 3.6mm fixed lens, F1.8 |
| Field of View | Horizontal 90°, vertical 50° |
| Night Vision | IR LEDs up to 30 meters |
| Compression | H.265, H.264, MJPEG |
| Video Streaming | Dual streaming supported |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | Max 7W |
| Ingress Protection | IP67 weatherproof rating |
| Housing Material | Aluminum and polycarbonate |
| Mounting | Wall or ceiling mount bracket included |
| Dimensions (W x H x D) | 70mm x 180mm x 70mm |
| Weight | 0.65 kg |
| Operating Temperature | -30°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Security Features | Password protection, SSL/TLS encryption, IP filtering |
| Motion Detection | Built-in motion detection with email alerts |
| Maintenance | Wipe lens with dry microfiber cloth; ensure vents are unobstructed |
| Repairability | Modular design with replaceable IR board and lens assembly |
Frequently Asked Questions - HE-1101 IDIS
How do I reset the IDIS HE-1101 to factory settings?
Press and hold the reset button on the side of the camera for 10 seconds until the status LED blinks red. The camera will reboot and load default settings.
What is the maximum number of users that can access the camera simultaneously?
The HE-1101 stream up to 20 concurrent viewers during normal operation, depending on network bandwidth and viewing mode.
Can I use wireless connection?
No, the HE-1101 is a wired Ethernet camera only. It requires a standard LAN cable or PoE switch for data and power.
Does the camera support audio recording?
Yes, the HE-1101 has a built-in microphone but no audio output. It supports two-way audio when using an external speaker via the audio line-out connector.
How do I update the firmware?
Download the latest firmware from the IDIS website, log into the camera web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not disconnect during the process.
What memory card does the HE-1101 accept?
The camera accepts microSD cards up to 256 GB (FAT32/exFAT) for local recording. Use high-endurance cards recommended for continuous recording.
How to enable motion detection alerts?
In the camera web configuration, go to Motion Detection tab, draw detection zones, set sensitivity, and configure email or FTP notification with snapshot or short video clips.
What is the LED status indicator pattern?
Steady green indicates normal operation, blinking green means network activity, red indicates an error, and blinking red during boot indicates firmware upgrade in progress.
Can the camera be used outdoors in heavy rain?
Yes, the HE-1101 has an IP67 rating, making it fully protected against dust and temporary immersion in water. Ensure the cable seal is properly installed and connectors are sealed.
What is the warranty period for this camera?
IDIS typically provides a 3-year replacement warranty for the HE-1101 model. Keep the receipt and register the product online for full coverage.
User questions about HE-1101 IDIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual HE-1101 - IDIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HE-1101 by IDIS.
USER MANUAL HE-1101 IDIS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IDIS
Model : HE-1101
Category : Surveillance Camera