AMP ST400 - Receiver Glemm - Free user manual and instructions
Find the device manual for free AMP ST400 Glemm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Glemm |
| Model | AMP ST400 |
| Amplifier Output Power | 100W per channel (stereo, 8 ohms) |
| Frequency Range | 20 Hz - 20 kHz |
| Tuner Bands | AM and FM |
| Inputs | RCA (AUX, CD, Tape), Phono (MM) |
| Outputs | Speaker terminals (A/B), Headphone jack |
| Tone Control | Bass and treble adjustment knobs |
| Remote Control | Included (IR) |
| Power Supply | AC 120V/230V, 50/60Hz (selectable) |
| Power Consumption | 300W maximum |
| Standby Power | Less than 1W in standby mode |
| Dimensions (W x H x D) | 430 x 140 x 350 mm (16.9 x 5.5 x 13.8 inches) |
| Weight | 8.2 kg (18.1 lbs) |
| Impedance | Compatible with 4-16 ohms speakers |
| Signal-to-Noise Ratio | 85 dB (LINE input) |
| Total Harmonic Distortion | 0.05% (at rated output) |
| Chassis Material | Aluminum front panel, steel body |
| Cooling | Natural convection with ventilation slots |
| Cleaning Instructions | Wipe with a soft dry cloth; avoid solvents |
| Safety Features | Overload protection, short-circuit protection |
| Spare Parts Availability | Contact authorized Glemm service centers |
Frequently Asked Questions - AMP ST400 Glemm
How do I connect my speakers to the AMP ST400?
Connect speakers to the speaker terminals on the rear panel. Ensure the impedance is between 4 and 16 ohms. Loosen the terminal, insert the bare wire, then tighten. Press the A or B speaker selector button on the front panel to activate the corresponding pair.
Can I connect a turntable to this receiver?
Yes, the AMP ST400 has a dedicated PHONO input for turntables with a moving magnet (MM) cartridge. Connect the turntable's ground wire to the GND terminal.
How do I select between FM and AM tuner?
Press the BAND button on the front panel or remote control to toggle between FM and AM. Tune manually with the TUNING knob or use the automatic seek function.
What is the maximum power output?
The AMP ST400 delivers up to 100 watts per channel into 8 ohms, which is sufficient for most home speaker systems.
Does the receiver support remote control?
Yes, a remote control is included. It allows you to adjust volume, select inputs, and control the tuner from a distance.
How do I set the radio stations?
Tune to the desired station, then press the MEMORY button and select a preset number (e.g., 1-10). You can program up to 10 FM and 10 AM stations.
What should I do if there is no sound?
Check that the correct input source is selected and the volume is turned up. Verify speaker connections and that the A/B speakers are engaged. Also, make sure the mute function is not active.
Can I use this receiver with a subwoofer?
The AMP ST400 does not have a dedicated subwoofer output. You can connect a subwoofer with speaker-level inputs in parallel with your main speakers.
How do I clean and maintain the receiver?
Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols. Keep the ventilation slots clear of dust.
Where can I find spare parts or service?
For spare parts or repairs, contact an authorized Glemm service center. Refer to the warranty card or the Glemm website for the nearest location.
User questions about AMP ST400 Glemm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AMP ST400 - Glemm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP ST400 by Glemm.
USER MANUAL AMP ST400 Glemm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Glemm
Model : AMP ST400
Category : Receiver