OnFall Pro V-930594 - Headphones Vortred - Free user manual and instructions
Find the device manual for free OnFall Pro V-930594 Vortred in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wireless Over-Ear Headphones |
| Brand | Vortred |
| Model | OnFall Pro V-930594 |
| Connectivity | Bluetooth 5.0 |
| Wireless range | Up to 10 meters |
| Battery capacity | 400 mAh |
| Charging time | 2 hours |
| Playback time | Up to 20 hours |
| Driver size | 40 mm |
| Impedance | 32 ohms |
| Frequency response | 20 Hz - 20 kHz |
| Microphone | Built-in with noise cancellation |
| Controls | Touch controls for music and calls |
| Weight | 250 g |
| Dimensions (W x H x D) | 180 x 170 x 80 mm |
| Foldable design | Yes |
| Noise cancellation | Active noise cancellation (ANC) |
| Water resistance | IPX4 |
| Maintenance | Clean with a soft dry cloth |
| Safety warnings | Do not expose to high humidity or extreme temperatures |
| Spare parts | Replacement ear cushions available |
| Repairability | User-replaceable ear pads and battery |
Frequently Asked Questions - OnFall Pro V-930594 Vortred
How do I pair my OnFall Pro V-930594 with my smartphone?
To pair your headphones, turn them on and activate Bluetooth on your smartphone. Search for OnFall Pro V-930594 in the available devices and select it. If prompted, enter the PIN 0000 or confirm the pairing request.
How long does the battery last and how do I charge it?
The built-in 400 mAh battery provides up to 20 hours of playback time. Charging takes about 2 hours via the included USB-C cable. A full charge is indicated by a solid green LED on the headphones.
Can I use the headphones while they are charging?
Yes, you can use the headphones in passive mode while charging if the battery is completely drained. However, for best performance and to avoid damage, we recommend using them wirelessly after a full charge.
Are the ear cushions replaceable?
Yes, the ear cushions are detachable and can be replaced. Gently pull the old cushions off and snap the new ones into place. This allows you to maintain hygiene and extend the life of your headphones.
How do I clean my headphones?
Use a soft, dry, lint-free cloth to wipe the exterior surfaces. For the ear cushions, you can slightly dampen the cloth with water. Avoid using any chemical cleaners or submerging the headphones in liquid.
Is the headset compatible with voice assistants?
Yes, the built-in microphone supports voice assistants like Siri and Google Assistant. Press and hold the multifunction button for 2 seconds to activate your device's voice assistant.
What does the LED indicator mean?
The LED indicator shows the charging status: red while charging, green when fully charged. During Bluetooth pairing, the LED blinks red and blue alternately. A slow red blink indicates low battery below 10%.
How do I reset the headphones?
To reset, turn off the headphones, then press and hold the power button for 10 seconds until the LED flashes red three times. This clears the pairing list and restores factory settings.
Can I use the headphones with a wired connection?
Yes, the headset includes a 3.5mm audio cable. Plug one end into the headphones and the other into your device. The headphones will automatically switch to wired mode when the cable is connected.
Is the headset sweat-resistant?
The Vortred OnFall Pro V-930594 has an IPX4 water resistance rating, meaning it can withstand splashes of water and sweat, making it suitable for workouts and outdoor activities.
User questions about OnFall Pro V-930594 Vortred
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual OnFall Pro V-930594 - Vortred and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OnFall Pro V-930594 by Vortred.