Reference RS 1001 - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free Reference RS 1001 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Infinity |
| Model | Reference RS 1001 |
| Speaker Design | 2-way bass reflex bookshelf |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 88 dB (2.83V/1m) |
| Nominal Impedance | 8 ohms |
| Power Handling | 10 - 100 W RMS |
| Recommended Amplifier Power | 20 - 80 W per channel |
| Drivers | 1 x 6.5-inch woofer, 1 x 1-inch tweeter |
| Enclosure Type | Bass reflex (ported) |
| Port | Rear-firing |
| Crossover Frequency | 2.5 kHz |
| Binding Posts | Single-wire 5-way gold-plated |
| Dimensions (H x W x D) | 14.2 x 8.5 x 10.2 inches (360 x 216 x 260 mm) |
| Weight | 12.6 lbs (5.7 kg) |
| Finish | Black ash vinyl |
| Placement | Bookshelf or speaker stand |
| Recommended Room Size | 10 - 25 m² |
| Warranty | 5 years (manufacturer) |
Frequently Asked Questions - Reference RS 1001 INFINITY
How should I connect my Infinity Reference RS 1001 speakers to my amplifier?
Use high-quality speaker wire with banana plugs or bare wire. Connect the positive (red) terminal to the amplifier's positive output and the negative (black) to the negative. Ensure there are no stray strands shorting the terminals.
Where should I place the RS 1001 for optimal sound?
Position the speakers at ear level when seated. Place them at least 6 inches from the wall to avoid reinforcing bass. Angle them toward the listening position for proper imaging.
Can I use them as rear surround speakers?
Yes, they work well as surround speakers in a home theater setup. For small to medium rooms, they deliver accurate and immersive sound.
How do I clean the speaker cabinet?
Use a soft, dry microfiber cloth to wipe the cabinet. Do not use harsh chemicals or water. For the grille, gently vacuum with a brush attachment or use a lint roller.
Do the speakers need a break-in period?
Yes, we recommend a break-in of roughly 20-30 hours of play at moderate volume. The drivers and surround will loosen up, providing more extended bass and smoother treble.
Can I bi-wire the RS 1001?
The RS 1001 has single binding posts, so it does not support bi-wiring. Use the included jumper plates or standard wiring for best results.
What amplifier power is needed?
With an 8-ohm impedance and 88 dB sensitivity, an amplifier delivering 20 to 80 W per channel will drive them comfortably. Higher power with clean headroom is always beneficial.
How can I protect my speakers from damage?
Avoid overdriving your amplifier beyond the sustainable power, which causes distortion that can damage the drivers. Also, keep them away from direct sunlight and moisture. Use a subwoofer crossover to prevent excessive bass excursion if needed.
Are the speaker grilles removable?
Yes, the grilles are removable. Gently pull them away from the cabinet. They are held by pegs; carefully press them back to reattach.
What does the sensitivity rating mean?
The sensitivity of 88 dB means that with 1 watt of input at 1 meter, the speaker produces 88 dB of sound pressure. Higher sensitivity speakers require less power to reach the same volume.
User questions about Reference RS 1001 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Reference RS 1001 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference RS 1001 by INFINITY.
USER MANUAL Reference RS 1001 INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : Reference RS 1001
Category : Loudspeaker