Reference REF-8632CFX - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free Reference REF-8632CFX INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor-standing loudspeaker |
| Brand | Infinity |
| Model | Reference REF-8632CFX |
| Category | Loudspeaker |
| Design | 3-way bass-reflex |
| Woofer | Dual 200 mm (8") cones |
| Midrange | 165 mm (6.5") cone |
| Tweeter | 25 mm (1") dome |
| Frequency Response | 35 Hz - 40 kHz (±3 dB) |
| Impedance | 8 ohms |
| Sensitivity | 90 dB (2.83 V / 1 m) |
| Recommended Amplifier Power | 50 - 200 W RMS |
| Crossover Frequencies | 800 Hz, 2500 Hz |
| Enclosure Type | Bass-reflex with front-firing port |
| Binding Posts | Dual bi-wire / bi-amp terminals |
| Dimensions (H × W × D) | 1020 × 250 × 320 mm (40" × 9.8" × 12.6") |
| Weight Each | 25 kg (55 lbs) |
| Finish | Black ash vinyl wood veneer |
| Maintenance | Dust with a soft dry cloth; avoid chemical cleaners |
| Safety | Place on stable surface; keep away from moisture |
| Spare Parts | Available via authorized Infinity service centers |
| Repairability | Modular drivers allow individual replacement |
Frequently Asked Questions - Reference REF-8632CFX INFINITY
How do I connect the Infinity Reference REF-8632CFX to my amplifier?
Connect each speaker to the amplifier's speaker outputs using high-quality speaker wire. For a standard connection, use the upper binding posts and ensure red to red and black to black. If your amplifier supports it, you can bi-wire or bi-amp using the separate terminals.
What is the recommended placement for these floor-standing speakers?
Position them at least 30 cm from walls to allow the bass reflex port to work properly. Angle them slightly toward the listening position for optimal stereo imaging. The tweeters should be at ear height.
Can I use the Reference REF-8632CFX with a subwoofer?
Yes, you can integrate a subwoofer. Set the speakers to "large" or "full-range" if your receiver allows, and let the subwoofer handle only the deepest frequencies. This will enhance the low-end response.
How long is the break-in period?
A break-in period of 50 to 100 hours at moderate listening levels is recommended. This allows the driver suspension to loosen and the speaker to reach its full performance.
What is the correct impedance and why is it important?
The nominal impedance is 8 ohms. It is important to match the speaker impedance to your amplifier's rating. An 8-ohm load is compatible with most amplifiers and is a safe, stable load.
How do I maintain the speaker's appearance?
Clean the cabinet with a soft, dry microfiber cloth. Do not use water, solvents, or abrasive cleaners. For the grille, gently vacuum with a soft brush attachment.
What safety precautions should I take?
Place the speakers on a stable, level surface to prevent tipping. Keep them away from direct sunlight, moisture, and heat sources. Do not expose them to excessive volume levels that could damage the drivers.
Are spare parts available for the Reference REF-8632CFX?
Yes, genuine Infinity spare parts such as drivers, crossovers, and binding posts are available through authorized service centers. Contact Infinity customer support for part numbers and replacement procedures.
Can I use these speakers for home theater?
Absolutely. With their high sensitivity and power handling, they work well as main front speakers in a home theater system. Add a center channel and surround speakers for a complete setup.
How do I clean the speaker connections to ensure good contact?
Periodically check the binding posts for tarnish or oxidation. Clean them with a dry contact cleaner and a lint-free cloth. Ensure all connections are tight to prevent signal loss and distortion.
User questions about Reference REF-8632CFX INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Reference REF-8632CFX - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference REF-8632CFX by INFINITY.
USER MANUAL Reference REF-8632CFX INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : Reference REF-8632CFX
Category : Loudspeaker