Arizona 100 - Ignition Audibax - Free user manual and instructions
Find the device manual for free Arizona 100 Audibax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas grill igniter |
| Brand | Audibax |
| Model | Arizona 100 |
| Ignition Type | Push-button piezo electric |
| Material | Stainless steel and high-temperature plastic |
| Dimensions | 5 cm x 3 cm x 2 cm |
| Weight | 0.05 kg |
| Power Source | 1 x AA 1.5V battery |
| Spark Voltage | High-voltage spark (approximately 10 kV) |
| Cable Length | 0.6 m |
| Compatibility | Most gas grills and fireplaces |
| Installation | Mount near burner with included screw |
| Heat Resistance | Up to 150°C |
| Operation | Press button to generate a spark and ignite gas |
| Maintenance | Wipe with a dry cloth; keep electrode clean and dry |
| Battery Replacement | Replace AA battery when spark weakens |
| Safety | Do not touch electrode while sparking; keep away from children |
| Package Contents | 1 igniter, 1 mounting screw, 1 gasket |
| Certifications | CE, RoHS |
| Warranty | 1 year |
Frequently Asked Questions - Arizona 100 Audibax
How do I install the Audibax Arizona 100 ignition system?
Attach the mounting bracket near the gas burner using the included screw. Connect the spark electrode to the bracket and ensure it is positioned to create a spark gap of about 3-5 mm to the metal burner surface.
How do I use the Arizona 100 to light my grill?
Open the gas valve, then press the ignition button firmly. This generates a high-voltage spark that ignites the gas. If the flame does not light within a few seconds, turn off the gas and wait before trying again.
Why is there no spark when I press the button?
Check if the AA battery is installed correctly or needs replacing. Also clean the electrode tip and ensure the wire is securely connected. Inspect the spark gap and adjust it to 3-5 mm if needed.
How do I replace the battery in the Arizona 100?
Twist or slide open the battery compartment, typically located on the igniter body. Remove the old AA battery and insert a new 1.5V AA battery with the correct polarity. Close the compartment securely.
How should I clean and maintain the igniter?
Wipe the outer surface with a dry cloth after each use. Clean the electrode with a soft brush to remove soot or grease. Avoid water contact and never use abrasive cleaners.
Is the Arizona 100 ignition system waterproof?
It is not fully waterproof. It is designed to be weather-resistant, but avoid direct exposure to rain or water. Cover the igniter when the grill is not in use.
Can I use this igniter indoors?
It can be used for indoor gas appliances, but always ensure proper ventilation and follow the appliance manufacturer's instructions. Never operate in a confined space with a gas leak.
What type of battery does the Arizona 100 require?
It requires one AA (LR6) 1.5V battery. Standard alkaline batteries are recommended for reliable performance.
How do I adjust the electrode gap?
Use pliers to gently bend the electrode so the tip is positioned 3-5 mm away from the burner metal surface. Too large or too small a gap may prevent a spark.
Is the Audibax Arizona 100 safe to use?
Yes, when used according to the manual. Always turn off the gas before inspecting or cleaning the igniter. Do not touch the electrode while pressing the ignition button, as it produces a high-voltage shock.
User questions about Arizona 100 Audibax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual Arizona 100 - Audibax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Arizona 100 by Audibax.
USER MANUAL Arizona 100 Audibax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audibax
Model : Arizona 100
Category : Ignition