Bar Event 1212 - Ignition Audibax - Free user manual and instructions
Find the device manual for free Bar Event 1212 Audibax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Event Light Bar |
| Brand | Audibax |
| Model | Bar Event 1212 |
| Dimensions (L x W x H) | 1000 mm x 120 mm x 160 mm |
| Weight | 5.4 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 150 W |
| Light Source | LED |
| Number of LEDs | 12 |
| LED Power | 12 W each |
| DMX Channels | 6 / 12 / 18 selectable |
| Control Modes | DMX512, Sound Active, Auto, Master/Slave |
| Sound Activation | Built-in microphone with sensitivity control |
| Auto Program | Built-in automatic light show |
| Housing Material | Metal and heat-resistant plastic |
| Cooling | Ventilated heat sinks |
| Mounting | Floor standing or rigging brackets |
| Safety Features | Power fuse, safety cable loop |
| Maintenance | Clean with a dry cloth, check connections |
| Included Accessories | Power cable, DMX cable, mounting brackets |
| Repairability | LED units and power supply replaceable |
Frequently Asked Questions - Bar Event 1212 Audibax
How to set the Audibax Bar Event 1212 to sound-active mode?
Press the mode button until the sound active indicator lights up. Adjust the microphone sensitivity knob to trigger the light effects properly.
How to connect the Bar Event 1212 to a DMX controller?
Use a standard DMX cable. Set the DMX address using the control panel or DIP switches, then connect the DMX input to your controller and link additional units via the DMX output.
What are the DMX channel configurations available?
The unit supports 6-channel, 12-channel, and 18-channel modes. Channel assignments control color, strobe, dimmer, and program selection.
How to clean the light bar safely?
Disconnect the power before cleaning. Use a soft dry cloth to wipe the housing and lenses. Do not use solvents or abrasive materials.
Can I power multiple units daisy-chained?
Yes, the Bar Event 1212 has power input and output sockets. You can daisy-chain up to 6 units, depending on the mains voltage and total power consumption.
How to replace a faulty LED in the Bar Event 1212?
LED modules are replaceable. However, opening the fixture may expose live parts, so it should only be done by a qualified technician. Contact Audibax support for spare parts.
What is the recommended operating environment?
Operate in a dry and well-ventilated area. Avoid rain, moisture, and extreme heat. Keep the unit away from flammable materials and ensure clearances for airflow.
How to set the DMX address on the fixture?
Use the control buttons to enter the menu, select the DMX address option, and adjust the value with the up/down buttons. Press enter to save. See the DMX chart for channel mapping.
Why is the light not reacting to sound?
Check that the unit is in sound-active mode. Verify the microphone sensitivity is not set too low. Also ensure the microphone hole is not blocked and the sound source is loud enough.
Is the Bar Event 1212 suitable for outdoor use?
The fixture is rated for indoor use only. For outdoor installations, place it in a weatherproof enclosure that protects against water and dust.
User questions about Bar Event 1212 Audibax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual Bar Event 1212 - Audibax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bar Event 1212 by Audibax.
USER MANUAL Bar Event 1212 Audibax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audibax
Model : Bar Event 1212
Category : Ignition