AT35-PARM - Uncategorized ATLAS - Free user manual and instructions
Find the device manual for free AT35-PARM ATLAS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital temperature and humidity meter |
| Brand | ATLAS |
| Model | AT35-PARM |
| Dimensions | 110 x 70 x 20 mm |
| Weight | 120 g |
| Power supply | 2 x AAA batteries |
| Battery life | Approximately 12 months |
| Display | LCD with backlight |
| Temperature measurement range | -10°C to +50°C (14°F to 122°F) |
| Humidity measurement range | 20% to 90% RH |
| Accuracy | ±1°C, ±5% RH |
| Main functions | Indoor temperature/humidity display, min/max memory, alarm |
| Control buttons | 3 buttons (Set, Up, Down) |
| Mounting options | Table stand or wall mount |
| Maintenance | Wipe with a soft dry cloth |
| Safety warnings | Avoid water exposure and direct sunlight |
| Spare parts | Batteries are user-replaceable; no other spare parts required |
| Repairability | Designed for maintenance-free use |
| General information | Free PDF user manual available from manufacturer |
Frequently Asked Questions - AT35-PARM ATLAS
How do I install batteries?
Open the battery compartment on the back, insert two AAA batteries matching the polarity marks, close the cover. The device will power on automatically.
How do I switch between temperature and humidity?
Press the Set button to cycle through the display modes: temperature only, humidity only, or both simultaneously. The selected mode will be indicated on the LCD.
How do I set the alarm?
Press and hold the Set button for 3 seconds to enter alarm mode, then use the Up and Down buttons to adjust the value and press Set to confirm.
How do I clear min/max readings?
Press and hold the Down button for 3 seconds to reset the recorded minimum and maximum values to the current readings.
How do I mount the device on a wall?
Use the keyhole slot on the back. Mark the wall, insert a screw, and hang the device securely. Alternatively, use the foldable stand for table placement.
How do I clean the device?
Wipe the exterior with a soft dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off during cleaning.
What is the measurement range?
The temperature range is -10°C to +50°C and the humidity range is 20% to 90% RH. Readings are displayed within these limits.
How do I ensure accurate readings?
Place the device in a well-ventilated area away from direct sunlight, heat sources, and moisture. Allow it to stabilize for at least 30 minutes after initial placement.
Can I calibrate the device?
The AT35-PARM is factory calibrated and does not require user calibration. If you suspect drift, contact ATLAS support for verification.
Does it have backlight?
Yes, the device features a blue backlight for easy reading in low-light conditions. Press the Up button to activate the backlight for 10 seconds.
User questions about AT35-PARM ATLAS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AT35-PARM - ATLAS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT35-PARM by ATLAS.
USER MANUAL AT35-PARM ATLAS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATLAS
Model : AT35-PARM
Category : Uncategorized