AN-RCC1220 - Detector Aconatic - Free user manual and instructions
Find the device manual for free AN-RCC1220 Aconatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Detector |
| Brand | Aconatic |
| Model | AN-RCC1220 |
| Detection Technology | Passive infrared (PIR) sensor |
| Detection Range | Up to 10 meters |
| Detection Angle | 120 degrees horizontal |
| Power Supply | 9V DC battery (included) |
| Battery Life | Approximately 1 year |
| Alarm Output | Built-in siren, 85 dB at 3 meters |
| LED Indicator | Red/Green status LED |
| Test Function | Dedicated test button for manual check |
| Low Battery Warning | Audible beep every 30 seconds |
| Tamper Protection | Anti-tamper switch activates alarm on removal |
| Mounting Type | Wall-mounted with included bracket |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | ≤90% relative humidity, non-condensing |
| Dimensions (W x H x D) | 110 x 60 x 35 mm |
| Weight | 150 grams |
| Compliance | CE certified |
| Usage Environment | Indoor use only |
| Maintenance | Clean with a soft dry cloth and avoid water |
| Repair Policy | Do not disassemble; contact qualified service for repair |
Frequently Asked Questions - AN-RCC1220 Aconatic
How do I install the Aconatic AN-RCC1220 detector?
Choose a wall location 2.5 meters above floor and away from air vents. Mount the bracket with screws, then snap the detector onto the bracket. Follow the manual for optimal coverage.
When should I replace the battery?
The detector emits a low-battery beep every 30 seconds. Replace the 9V DC battery immediately to maintain protection. Use a quality alkaline battery.
What does the red LED indicator mean?
A steady red LED typically indicates the alarm is activated. A blinking red LED may signal a fault or low battery. Refer to the manual for the exact code.
How can I test if the detector is working?
Press the test button on the device. If the siren sounds within 2 seconds and the red LED flashes, the detector is functioning correctly. Test monthly.
How do I clean the detector?
Use a soft, dry cloth to wipe the exterior. Avoid water, solvents, and abrasive cleaners. Do not remove the cover; dust inside the sensor can be blown away with compressed air.
Can I use this detector outdoors?
No, the AN-RCC1220 is designed for indoor use only. Exposure to moisture or extreme temperatures may cause false alarms or damage. Keep it in a sheltered environment.
Why does the alarm go off accidentally?
Check for heat sources, direct sunlight, or moving objects near the detector. Also, ensure the device is not positioned in a drafty area. Reducing sensitivity may help, but confirm settings in the manual.
How do I temporarily silence a false alarm?
You can press the test/mute button to silence the alarm for about 5 minutes. The detector will re-arm automatically. Do not disable the detector for extended periods.
Does this detector have a tamper switch?
Yes, the anti-tamper switch triggers the alarm if the detector is removed from its mounting bracket. This prevents unauthorized disabling.
What should I do if the detector is not responding?
First, check the battery and test button. If it still fails, clean the sensor lens. If issues persist, contact Aconatic customer support or a qualified technician for repair.
User questions about AN-RCC1220 Aconatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual AN-RCC1220 - Aconatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AN-RCC1220 by Aconatic.
USER MANUAL AN-RCC1220 Aconatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aconatic
Model : AN-RCC1220
Category : Detector