ZQ5004 - Receiver PHOENIX GOLD - Free user manual and instructions
Find the device manual for free ZQ5004 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Car Audio Amplifier |
| Brand | Phoenix Gold |
| Model | ZQ5004 |
| Number of Channels | 4 |
| Maximum Power Output | 500 watts total |
| RMS Power per Channel | 50 W x 4 at 4 ohms |
| Bridged Output | 200 W x 2 at 4 ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | Greater than 90 dB |
| Input Impedance | 10 kΩ |
| Dimensions (W x H x D) | 320 x 60 x 180 mm (12.6 x 2.4 x 7.1 in) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 12V DC (negative ground) |
| Fuse Rating | 3 x 25A |
| Maintenance and Cleaning | Wipe with a dry, soft cloth. Avoid liquids and keep air vents unobstructed. |
| Safety | Disconnect power before installation. Use proper fuses and ensure correct polarity. |
| Spare Parts and Repairability | No user-serviceable parts. Contact an authorized Phoenix Gold service center for repairs. |
| General Information | Designed for car audio systems, reliable and compact 4-channel amplification. |
Frequently Asked Questions - ZQ5004 PHOENIX GOLD
What is the maximum power output of the Phoenix Gold ZQ5004?
The ZQ5004 delivers a total maximum output of 500 watts. This is split across 4 channels, providing powerful and clear audio for your car system.
How many channels does the ZQ5004 have?
It has 4 channels, allowing you to connect up to four speakers or two speakers in bridged mode. This flexibility makes it ideal for a variety of car audio setups.
What speaker impedance is recommended?
The amplifier is stable with most car speakers. For optimal performance, use 4-ohm speakers for standard stereo output, and 4-ohm bridged for maximum power. Always check your speaker's impedance rating.
Can I bridge channels of the ZQ5004?
Yes, you can bridge two pairs of channels to increase power to a single speaker. This is useful for powering a subwoofer or a high-power component speaker. The bridged mode provides 200 watts per channel pair.
What is the frequency response of this amplifier?
The frequency response spans from 20 Hz to 20 kHz, covering the full audible range with minimal distortion. This ensures accurate reproduction of bass, mids, and highs.
How do I connect the ZQ5004 to my car stereo?
Use high-quality RCA cables from your stereo's preamp outputs to the amplifier's input jacks. Ensure the power and ground wires are properly connected to the 12V battery and chassis ground, and connect speaker wires to the terminal blocks with correct polarity.
What type of power connection does the ZQ5004 require?
The amplifier operates on a 12V DC negative ground system. Connect the power terminal via a fused 12V line, and the ground terminal to a solid chassis point. Use a wire gauge appropriate for the current draw.
How should I clean and maintain the amplifier?
Periodically wipe the external surfaces with a dry, soft cloth. Avoid using any liquids or harsh chemicals. Ensure the cooling vents are free from dust and debris to maintain proper airflow and prevent overheating.
What safety precautions should I take during installation?
Always disconnect the negative battery terminal before starting installation. Use the recommended fuse rating, protect the power wire with a grommet, and route wires away from sharp edges. Double-check connections for correct polarity to avoid damage.
What should I do if the amplifier overheats or shuts down?
If the amplifier overheats, it may trigger thermal protection. Turn off the system and allow it to cool. Check that the impedance load is within the specified range and that there is adequate ventilation. If the problem persists, inspect for wiring issues or consult a professional installer.
User questions about ZQ5004 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual ZQ5004 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZQ5004 by PHOENIX GOLD.
USER MANUAL ZQ5004 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : ZQ5004
Category : Receiver