ELECTRA-P2-60W-1 - Adapter / Network Card Ernitec - Free user manual and instructions
Find the device manual for free ELECTRA-P2-60W-1 Ernitec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power over Ethernet (PoE) Adapter / Network Card |
| Brand | Ernitec |
| Model | ELECTRA-P2-60W-1 |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Output Voltage | 48 V DC |
| Maximum Power | 60 W |
| Output Current | 1.25 A |
| Compatibility | IEEE 802.3af / 802.3at / 802.3bt PoE devices |
| Ethernet Ports | 1 x RJ45 data input, 1 x RJ45 PoE output |
| Data Rate | 10/100/1000 Mbps |
| Dimensions (approx) | 150 × 80 × 40 mm |
| Weight (approx) | 320 g |
| Operating Temperature | 0 °C to 40 °C |
| Main Functions | Supplies power and data over a single Ethernet cable; plug-and-play installation; protects connected equipment against overcurrent and short circuits |
| Maintenance and Cleaning | Disconnect from power before cleaning; wipe with a dry, soft cloth; do not use liquid cleaners or immerse in water |
| Safety | Place in a well-ventilated area; do not cover; keep away from moisture and heat sources; use only the supplied power cable |
| Spare Parts and Repairability | No user-serviceable internal parts; contact qualified service personnel for repair; standard RJ45 connectors and power cable can be replaced if damaged |
| General Information | For indoor use only; intended for use with compatible networking equipment; lifetime support via downloadable manual |
Frequently Asked Questions - ELECTRA-P2-60W-1 Ernitec
What is the purpose of the Ernitec ELECTRA-P2-60W-1?
It is a Power over Ethernet (PoE) adapter that combines power and data over a single Ethernet cable, allowing compatible devices such as IP cameras and wireless access points to be installed without a separate power outlet.
What PoE standards are supported?
The adapter supports IEEE 802.3af, 802.3at, and 802.3bt, making it compatible with a wide range of Powered Devices (PDs) up to 60 W.
What is the maximum power output?
The maximum output power is 60 watts at 48 V DC, which is sufficient for high-consumption devices like PTZ cameras or outdoor access points.
Can I use it with a 100 Mbps device?
Yes, the Ethernet ports support 10/100/1000 Mbps, so it is backward compatible with Fast Ethernet and Gigabit equipment.
How do I install the adapter?
Simply connect your router or switch to the data input port using an Ethernet cable, then connect the PoE output port to the powered device. No configuration is required.
Is the adapter protected against short circuits?
Yes, it includes overcurrent protection and short-circuit protection to safeguard both the adapter and the connected equipment.
How should I maintain the device?
Disconnect the adapter from power before cleaning, then wipe it with a dry, soft cloth. Avoid using liquids or abrasive cleaners.
What safety precautions should I follow?
Install the adapter in a well-ventilated area, away from moisture, direct sunlight, and heat sources. Do not cover the housing and use only the supplied power cable.
Is the device user-serviceable?
No, there are no user-serviceable parts inside. If the adapter malfunctions, contact qualified service personnel; only the external power cable and RJ45 connectors can be replaced by the user.
Where can I find the full manual?
The full user manual is available as a free PDF download on the Notice-Facile website in the documentation section for the Ernitec ELECTRA-P2-60W-1.
User questions about ELECTRA-P2-60W-1 Ernitec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Adapter / Network Card in PDF format for free! Find your manual ELECTRA-P2-60W-1 - Ernitec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELECTRA-P2-60W-1 by Ernitec.
USER MANUAL ELECTRA-P2-60W-1 Ernitec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ernitec
Model : ELECTRA-P2-60W-1
Category : Adapter / Network Card