CVF181D - Air conditioner Mirage - Free user manual and instructions
Find the device manual for free CVF181D Mirage in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner |
| Brand | Mirage |
| Model | CVF181D |
| Cooling Capacity | 18000 BTU/h |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 1800 W (cooling) |
| Refrigerant | R410A |
| Indoor Unit Dimensions (WxDxH) | 980 x 220 x 310 mm |
| Outdoor Unit Dimensions (WxDxH) | 880 x 310 x 650 mm |
| Indoor Unit Weight | 15 kg |
| Outdoor Unit Weight | 40 kg |
| Operation Modes | Cool, Heat, Fan, Dry, Auto |
| Airflow Volume | 600 m³/h |
| Noise Level (Indoor) | 35 - 50 dB(A) |
| Timer | 24-hour programmable |
| Remote Control | Included |
| Air Filter | Washable pre-filter |
| Dehumidification | 1.5 L/h |
| Energy Efficiency Class | A (cooling) |
| Safety Features | Anti-icing, overheat protection |
| Spare Parts Availability | Original parts via authorized service centers |
Frequently Asked Questions - CVF181D Mirage
How do I clean the air filter?
Turn off the unit and open the front panel. Slide out the filter and wash it with lukewarm water. Let it dry completely before reinstalling. It is recommended to clean the filter every two weeks.
Why is my air conditioner not cooling?
Check if the air filter is dirty, if the set temperature is too high, and if doors or windows are open. Also ensure the outdoor unit is not blocked. If the issue persists, contact an authorized service technician.
How do I set the timer?
Press the Timer button on the remote. Use the + or - buttons to set the desired on/off time. Confirm by pressing Timer again. You can set both auto-on and auto-off.
What maintenance is required?
Clean or replace the air filter every 2 weeks, check the drain pan for blockages, and have a professional inspect the refrigerant levels and electrical components annually.
Can I use an extension cord?
No. The air conditioner draws high current. Always connect it directly to a dedicated wall outlet. An extension cord, especially a light one, may overheat and cause a fire.
Why does water leak from my air conditioner?
The drain pipe may be clogged or the drain pan could be cracked. Also check if the unit is tilted incorrectly. Clean the drain pipe with a soft wire and ensure the unit is level.
What does error code E1 mean?
E1 indicates a sensor fault. This usually involves the room temperature sensor. Please contact customer support or an authorized technician for repair.
How do I switch between cooling and heating?
Use the remote control. Press the Mode button until the desired mode appears. The snowflake icon represents cooling, and the sun icon represents heating.
How often should I recharge refrigerant?
If the system is properly sealed, refrigerant does not need to be recharged. Loss of cooling efficiency often means a leak. Have a professional inspect and recharge if necessary.
Is this unit suitable for a large living room?
With 18000 BTU/h, it is typically suitable for rooms up to 60 square meters, depending on insulation and ceiling height. For precise sizing, refer to the manual's capacity guide.
User questions about CVF181D Mirage
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual CVF181D - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CVF181D by Mirage.
USER MANUAL CVF181D Mirage
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mirage
Model : CVF181D
Category : Air conditioner