HSC 4VXP - Microphone Schoeps - Free user manual and instructions
Find the device manual for free HSC 4VXP Schoeps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Microphone |
| Brand | Schoeps |
| Model | HSC 4VXP |
| Category | Microphone |
| Transducer Type | Back-electret condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 40 Hz - 20 kHz |
| Sensitivity | 15 mV/Pa ± 1 dB |
| Sound Pressure Level | Up to 142 dB SPL (with pre-attenuation) |
| Powering | P48 phantom power (12-48 V) |
| Output Connector | 3-pin XLR |
| Dimensions | Length 160 mm, diameter 20 mm |
| Weight | Approx. 90 g |
| Finish | Matte grey or black |
| Accessories | Instruction manual, mount |
| Maintenance | Clean with a soft dry cloth; use a pop shield |
| Safety | Do not expose to moisture or extreme temperatures |
| Spare Parts & Repairability | Spare capsules and electronics available; user-replaceable windscreen |
| General Information | Manufactured in Germany; high-quality studio and broadcast microphone |
Frequently Asked Questions - HSC 4VXP Schoeps
What type of microphone is the Schoeps HSC 4VXP?
The HSC 4VXP is a condenser microphone designed for professional sound reinforcement, broadcasting, and recording applications. It features a cardioid polar pattern to capture sound accurately while minimizing off-axis noise.
Does the HSC 4VXP require phantom power?
Yes, the HSC 4VXP requires phantom power (P48) to operate. It is compatible with standard 48 V phantom power sources, as well as 12 V in some cases, so ensure your mixer or interface provides phantom power.
What is the recommended distance for best sound?
For close-up speech or vocal pickup, a distance of 10-20 cm is recommended to achieve a natural tone with good presence. For ambient or farther sources, increase the distance and adjust the gain accordingly.
How do I connect the microphone?
Connect the HSC 4VXP to an audio interface or mixer using a standard XLR cable. Make sure the phantom power is enabled on the input channel before adjusting the gain to avoid damage.
Can I use this microphone for outdoor recordings?
The HSC 4VXP can be used outdoors, but it is recommended to use a windscreen or a foam cover to reduce wind noise. Avoid exposing the microphone to excessive moisture or extreme humidity.
How can I reduce plosive sounds?
To reduce plosive sounds ('p' and 'b' bursts), use a pop filter in front of the microphone, or position the microphone slightly off-axis. This helps prevent sudden air pressure from hitting the diaphragm.
Is the microphone sensitive to moisture?
Like all condenser microphones, the HSC 4VXP is sensitive to moisture. Keep it in a dry environment, use a desiccant in the storage case, and avoid touching the capsule. If moisture condenses on the microphone, allow it to warm up gradually in a dry place.
What stands or mounts are compatible?
The HSC 4VXP comes with a standard microphone mount that fits 3/8-inch and 5/8-inch threads. It can be used with most microphone stands, booms, or suspension mounts that match these thread sizes.
Does the microphone come with a warranty?
Schoeps offers a 10-year warranty on the HSC 4VXP, covering defects in materials and workmanship. Please keep your receipt and register the product on the Schoeps website for full coverage.
How do I clean the microphone?
Clean the exterior with a soft, dry cloth only. Do not use solvents or water. If the grille becomes dusty, use a small, soft-bristled brush or vacuum gently. Never disassemble the microphone, as this may damage the internal components.
User questions about HSC 4VXP Schoeps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual HSC 4VXP - Schoeps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSC 4VXP by Schoeps.