Mean Well

RID-125-2448 - Power Supply Mean Well - Free user manual and instructions

Find the device manual for free RID-125-2448 Mean Well in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Mean Well RID-125-2448 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Dual Output AC/DC Power Supply
Brand Mean Well
Model RID-125-2448
Input Voltage Range 88-264 VAC
Input Frequency 47-63 Hz
Output Voltage 1 24 V DC
Output Current 1 3.2 A
Output Voltage 2 48 V DC
Output Current 2 1.0 A
Total Output Power 125 W
Efficiency 86% typical
Protections Short circuit, overload, over voltage
Cooling Free air convection
Operating Temperature -20°C to +60°C
Storage Temperature -40°C to +85°C
Dimensions (W x H x D) 199 x 110 x 50 mm
Weight 0.66 kg
Connections Screw terminal blocks
Certifications UL, CE, CB approved
Maintenance and Cleaning Disconnect power before cleaning; wipe with dry cloth
Spare Parts and Repairability Designed for professional repair only; replace internal fuses and components as needed
General Information Enclosed metal case for industrial applications

Frequently Asked Questions - RID-125-2448 Mean Well

What is the input voltage range for the RID-125-2448?
The RID-125-2448 accepts a wide 88-264 VAC input range, making it suitable for worldwide applications. This universal input also covers frequencies of 47-63 Hz.
How do I connect the output wires?
Connect the DC output wires to the screw terminal blocks clearly marked V1, V2, COM and GND. Ensure the polarity is correct and tighten the screws to 0.7 Nm for a secure connection.
Can I use this power supply in parallel or series configuration?
For higher power, two units can be connected in series (with isolation diodes) to obtain double voltage. Parallel operation is not recommended unless a diode OR-ing is used. Refer to the manufacturer guidelines for exact wiring.
What protections are built into this power supply?
It includes short circuit protection, overload protection (135-165% of rated current), and over voltage protection (29-33V for V1, 56-63V for V2). These features protect both the supply and connected loads.
What is the operating temperature range?
The unit can operate in temperatures from -20°C to +60°C at full load. However, when ambient temperature exceeds 50°C, derating of output power is required. In storage, it can survive from -40°C to +85°C.
How should I clean and maintain the unit?
Always disconnect the power supply before cleaning. Wipe the metal enclosure with a dry, soft cloth or an anti-static cleaner. Do not use water or solvents, as they may damage internal components.
Is this power supply suitable for outdoor use?
No, it is rated for indoor use only. The RID-125-2448 is not sealed against moisture or dust. To use it outdoors, install it inside a proper IP-rated enclosure to prevent exposure to rain and condensation.
Are the output voltages adjustable?
Yes, the main output (V1) has a voltage trimming range of ±10% through an internal potentiometer. The secondary output (V2) is fixed. Adjust only while the unit is off and double-check with a multimeter.
What applications is the RID-125-2448 typically used for?
It is ideal for industrial control systems, telecom equipment, security systems, and electronic charging devices that need both 24V and 48V rails simultaneously from a single supply.
What should I do if the power supply stops working?
First, check the input fuse and AC connections. Verify that the load does not exceed the rated power. If the unit still shows no output, measure the output voltage. If needed, contact a qualified service technician or Mean Well distributor for repair.

User questions about RID-125-2448 Mean Well

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power Supply in PDF format for free! Find your manual RID-125-2448 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RID-125-2448 by Mean Well.

USER MANUAL RID-125-2448 Mean Well

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Mean Well

Model : RID-125-2448

Category : Power Supply