APC-8E-700 - Power Supply Mean Well - Free user manual and instructions
Find the device manual for free APC-8E-700 Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switching Power Supply (LED Driver) |
| Brand | Mean Well |
| Model | APC-8E-700 |
| Category | LED Power Supply, Constant Current |
| Input Voltage | 90–264 VAC (universal AC input) |
| Input Frequency | 47–63 Hz |
| Output Current | 700 mA (constant current) |
| Output Voltage Range | 5–12 VDC |
| Rated Power | 8 W |
| Efficiency | ≥80% at full load |
| Power Factor | ≥0.9 typical by passive PFC |
| Protection | Short circuit, overload, over voltage |
| Operating Temperature | -30°C to +70°C (with derating) |
| Storage Temperature | -40°C to +85°C |
| Cooling Method | Free air convection |
| Dimensions (L x W x H) | 77.5 x 40 x 29.5 mm |
| Weight | 180 g (approx.) |
| Mounting | Screw mounting, fixed to a flat surface |
| Housing | Plastic case, IP20 rated |
| Connectors | Terminal block for input/output wiring |
| Safety Standards | IEC/EN/UL 61347-2-13, GB19510.14 |
| EMC Compliance | EN 55015, EN 61000-3-2, EN 61000-3-3 |
| Warranty | 3 years (Mean Well standard) |
| Applications | LED strips, lighting fixtures, signage, architectural lighting |
Frequently Asked Questions - APC-8E-700 Mean Well
What is the output current and voltage range of the Mean Well APC-8E-700?
The Mean Well APC-8E-700 is a constant current LED driver that provides 700 mA output current. The output voltage range is 5–12 VDC, which allows it to power various LED configurations within that voltage window.
Can this power supply be used for LED strip lighting?
Yes, the APC-8E-700 is suitable for constant current LED strips that require 700 mA drive current. Ensure the total forward voltage of the LED strip falls within the 5–12 VDC range to maintain proper operation.
How do I wire the APE-8E-700 power supply?
Connect the AC input lines (L and N) to the terminal block marked for input, and verify the voltage is within 90–264 VAC. Then connect the LED load to the output terminals, respecting polarity. Always ensure the power is off during wiring.
What input voltage range does the APC-8E-700 accept?
The APC-8E-700 has a universal AC input of 90–264 VAC at 47–63 Hz, making it usable worldwide without additional converters.
Is the APC-8E-700 suitable for outdoor use?
No, the APC-8E-700 has an IP20 rating, meaning it is protected against solid objects over 12 mm but not against water. For outdoor applications, place it in a weatherproof enclosure.
What protection features are included in this power supply?
The unit includes short circuit protection, overload protection, and over voltage protection. These safeguard the driver and connected LEDs from electrical faults.
How should I mount the APC-8E-700?
Mount the unit with screws through its mounting holes onto a flat, non-flammable surface. Provide sufficient clearance for free air convection cooling and keep it away from heat sources.
What is the efficiency of this power supply?
The APC-8E-700 achieves an efficiency of at least 80% at full load. This reduces heat generation and energy loss during operation.
What is the warranty period for the Mean Well APC-8E-700?
Mean Well provides a standard 3-year warranty for this series, covering manufacturing defects under normal use and conditions.
Can the output of the APC-8E-700 be dimmed?
No, the APC-8E-700 is a constant current driver without a dimming function. To dim the LEDs, a compatible LED dimmer would need to be installed between the driver and the LED load.
User questions about APC-8E-700 Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Supply in PDF format for free! Find your manual APC-8E-700 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APC-8E-700 by Mean Well.