ICS-0808-0020 - Security Camera Lanberg - Free user manual and instructions
Find the device manual for free ICS-0808-0020 Lanberg in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera (Dome) |
| Brand | Lanberg |
| Model | ICS-0808-0020 |
| Sensor | 1/2.7-inch CMOS |
| Resolution | 2MP (1920x1080) @ 25fps |
| Lens | Fixed 3.6mm, FOV 78° |
| Night Vision | Built-in IR LEDs, range up to 20m |
| Audio | Two-way audio (built-in mic and speaker) |
| Connectivity | Wi-Fi 2.4GHz (802.11 b/g/n) + Ethernet 10/100 Mbps |
| Mounting | Ceiling or wall mount included |
| Power Supply | 12V DC 1A or PoE (802.3af) |
| Dimensions | 100 × 100 × 80 mm |
| Weight | 320 g |
| Housing Material | ABS Plastic |
| Ingress Protection | IP65 weatherproof (suitable for outdoor use) |
| Storage | MicroSD slot (max 128GB) and cloud recording options |
| Motion Detection | Yes, with alerts |
| Mobile App Compatibility | Android and iOS via Lanberg Smart app |
| Security Protocols | WPA2-AES, HTTPS encryption |
| Operating Temperature | -20°C to 50°C |
| Included in Box | Camera, mounting kit, power supply, user manual |
Frequently Asked Questions - ICS-0808-0020 Lanberg
How do I reset my Lanberg ICS-0808-0020 camera to factory defaults?
Locate the reset button (pinhole button) on the back of the camera. Press and hold it for 5 seconds with a paper clip until the LED blinks red. The camera will restart and all settings return to factory defaults.
Can I use the camera without a Wi-Fi network?
Yes, you can connect the camera directly to a router using an Ethernet cable. The camera also supports PoE (Power over Ethernet), allowing both data and power over one cable.
How far can the camera see at night?
The built-in IR LEDs provide night vision up to 20 meters in complete darkness, with an automatic day/night switch.
What is the maximum microSD card capacity supported?
The camera accepts microSD cards up to 128GB for local recording. Ensure the card is formatted to FAT32 or exFAT before inserting.
Is the camera compatible with Apple HomeKit or Google Home?
It works with the Lanberg Smart app on iOS and Android. It is not natively compatible with HomeKit or Google Home, but can be added via Alexa skill if supported.
How do I connect the camera to my home network?
Download the Lanberg Smart app, power the camera, and follow the in-app setup. For Wi-Fi connection, select your 2.4GHz network, enter the password, and scan the camera's QR code.
Can I access the camera remotely when I'm away?
Yes, after connecting to the internet, you can view live footage from anywhere via the app. It supports P2P remote access with secure encryption (WPA2-AES).
What is the power supply requirement?
The camera is powered via a 12V DC adapter (included) or standard PoE 802.3af. Power consumption is typically around 5W.
Does the camera support two-way audio?
Yes, it has a built-in microphone and speaker, allowing you to listen and talk through the Lanberg Smart app.
What should I do if the camera stops responding to motion detection?
Check the motion detection sensitivity in the app, ensure the camera firmware is updated, and verify that the detection zone is unobstructed. A factory reset may be needed if the issue persists.
User questions about ICS-0808-0020 Lanberg
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ICS-0808-0020 - Lanberg and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ICS-0808-0020 by Lanberg.
USER MANUAL ICS-0808-0020 Lanberg
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lanberg
Model : ICS-0808-0020
Category : Security Camera