C2R-CHYNA - Car Radio PAC - Free user manual and instructions
Find the device manual for free C2R-CHYNA PAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio |
| Brand | PAC |
| Model | C2R-CHYNA |
| Display Type | LCD |
| Tuner Bands | AM/FM |
| Bluetooth | Built-in |
| USB Port | Yes |
| AUX Input | Yes |
| Power Output | 4 x 50 Watts |
| Operating Voltage | 12V DC |
| Mounting Size | 1-DIN |
| Dimensions | 178 x 50 x 160 mm |
| Weight | 0.8 kg |
| Supported Audio Formats | MP3, WMA |
| Steering Wheel Control | Supported with adapter (sold separately) |
| Rear View Camera Input | Yes (RCA) |
| Equalizer | 5-band preset |
| Frequency Range | FM 87.5-108 MHz, AM 530-1710 kHz |
| Signal-to-Noise Ratio | >60 dB |
| Remote Control | Supported (optional) |
| Cleaning | Soft dry cloth |
| Safety | 12V negative ground only |
Frequently Asked Questions - C2R-CHYNA PAC
How do I pair my phone via Bluetooth?
Turn on Bluetooth on your phone, then press the Bluetooth button on the radio and select "Pair new device". Search for C2R-CHYNA in your phone's Bluetooth list and confirm. The radio will automatically connect the next time.
How do I set the clock?
Press the MODE button and hold until the clock display blinks, then use the VOLUME knob to adjust hours and minutes. Press MODE again to save.
Does this radio support steering wheel controls?
Yes, the radio supports aftermarket steering wheel control adapters. Use the wired remote input to connect an adapter compatible with your vehicle. Refer to the adapter's manual for programming.
How do I connect a rear view camera?
Use the RCA video input on the rear of the unit. Connect the camera's video cable to the yellow RCA connector. When you shift into reverse, the radio will automatically switch to the camera feed, provided the reverse signal is connected to your car's reverse light.
What should I do if the radio does not turn on?
First, check the ignition switch on your car. The radio is powered through the accessory circuit. Also check the fuse and wiring connections. If everything is correct, consult a professional installer.
Can I use a USB drive? What formats are supported?
Yes, use a USB drive with MP3 or WMA files. Insert it into the USB port and the radio will read the content automatically. Supported file systems include FAT16 and FAT32.
How do I reset the unit to factory settings?
Locate the RESET button on the front panel. Use a pointed object (e.g., a pen tip) and press and hold the button for 3 seconds. The unit will restart with default settings.
How do I install this radio in my car?
Use the included mounting sleeve and removal keys. Slide the sleeve into the dashboard, connect the wires (power, ground, speakers) according to the wiring diagram. Then slide the radio into the sleeve until it locks. Ensure the unit is grounded securely.
What is the maximum power output?
The built-in amplifier delivers 50 watts per channel, making a total output of 200 watts for four speakers. This is the peak power; continuous RMS power is lower.
How do I clean and maintain the radio?
Use a soft, dry cloth to wipe the faceplate and display. Avoid aggressive cleaners or solvents. Do not immerse in water. Keep the vents clear of dust to prevent overheating.
User questions about C2R-CHYNA PAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car Radio in PDF format for free! Find your manual C2R-CHYNA - PAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C2R-CHYNA by PAC.
USER MANUAL C2R-CHYNA PAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PAC
Model : C2R-CHYNA
Category : Car Radio