20 TLG - Drill GUDE - Free user manual and instructions
Find the device manual for free 20 TLG GUDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench drill (Tischbohrmaschine) |
| Brand | Güde |
| Model | 20 TLG |
| Max. Drilling Capacity in Steel | 20 mm |
| Max. Drilling Capacity in Wood | 25 mm |
| Chuck Capacity | 1.5–16 mm |
| Spindle Speed Adjustment | Variable speed control |
| Speed Range | 610–2500 rpm |
| Motor Power | 550 W |
| Voltage | 230 V |
| Spindle Travel | 60 mm |
| Drilling Depth | 60 mm |
| Throat Depth | 100 mm |
| Table Size | 200 × 200 mm |
| Column Diameter | 50 mm |
| Base Dimensions | 300 × 250 mm |
| Net Weight | 32 kg |
| Overall Dimensions (W×D×H) | 380 × 380 × 900 mm |
| Operation | Manual electrical switch |
| Safety Features | Transparent drill guard with lock |
| Maintenance | Lubricate spindle and gears regularly; clean air vents |
| Repairability | Replaceable chuck, belts, and carbon brushes |
Frequently Asked Questions - 20 TLG GUDE
What is the Güde 20 TLG drill used for?
The Güde 20 TLG is a bench drill designed for accurate and repeatable drilling in wood, metal and plastic. It is ideal for workshop tasks that require perpendicular holes.
How do I adjust the drilling speed on the 20 TLG?
The 20 TLG features a speed adjustment mechanism on the motor. Loosen the tension knob on the belt cover, move the belt between the pulley steps and tighten the knob again. Refer to the manual for the matching belt position for your desired speed.
What safety equipment should I use when operating the drill?
Always wear safety goggles and hearing protection. Avoid loose clothing and gloves near rotating parts. Use hold-down clamps to secure the workpiece to the table.
What is the maximum chuck size?
The drill is equipped with a self-centering chuck that accepts drill bits from 1.5 mm to 16 mm, covering most standard bits for home and professional use.
Can the Güde 20 TLG be used for metal threading?
Yes, when used with appropriate HSS twist drills and cutting fluid, the 20 TLG can drill into steel and other non-ferrous metals. It is not designed for tapping threads; a separate tapping attachment would be needed.
How do I maintain the drill to keep it in good condition?
Regularly remove dust and chips from the chuck and speed pulleys. Apply light oil to the spindle and linkage. Check the drive belt for wear and replace it if damaged.
What should I do if the drill bit jams?
Power off the machine immediately and remove the jam with a wrench. Check that the bit is sharply ground and that the spindle speed is suitable for the material and bit diameter. Use feed pressure steadily without forcing.
Where can I download the instruction manual for the 20 TLG?
The free PDF manual for the Güde 20 TLG is available at notice-facile.com. You can download it in English or request a translation in another language.
Are spare parts available for this model?
Yes, common replacement parts such as the chuck, drive belt, and carbon brushes are still available from Güde and third-party suppliers. Search for the part number in the manual.
How deep can the drill go?
The spindle stroke is 60 mm, allowing holes up to 60 mm deep in one movement. For deeper holes, lift the drill and repeat several times.
User questions about 20 TLG GUDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 20 TLG - GUDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 20 TLG by GUDE.
USER MANUAL 20 TLG GUDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GUDE
Model : 20 TLG
Category : Drill