Move SD-330 - Security Camera Mobotix - Free user manual and instructions
Find the device manual for free Move SD-330 Mobotix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Mobotix |
| Model | Move SD-330 |
| Category | Security Camera |
| Product Type | PTZ IP Security Camera |
| Image Sensor | 1/2.8" Progressive CMOS |
| Resolution | 5 Megapixels (2592 x 1944) |
| Lens | Motorized Varifocal, 10x Optical Zoom |
| Field of View | 45° (Wide) to 5° (Tele) |
| Pan Range | 360° Continuous |
| Tilt Range | -10° to +90° |
| Video Compression | H.265 / H.264 / MJPEG |
| Frame Rate | Up to 30 fps |
| Audio | Two-way with Built-in Mic and Speaker |
| Network | 10/100/1000 Mbps Ethernet |
| Power Source | PoE+ (802.3at) or 12V DC |
| Ingress Protection | IP66 (Weatherproof) |
| Operating Temperature | -20°C to +50°C |
| Dimensions | 130 x 130 x 260 mm |
| Weight | 1.6 kg |
| Storage | microSD Slot up to 256 GB |
| Remote Monitoring | Via Web Browser or Mobile App |
| Maintenance | Clean with Soft Dry Cloth; No Solvents |
| Spare Parts | Available from Authorized Dealers |
| General Info | Free Manual Downloadable in PDF |
Frequently Asked Questions - Move SD-330 Mobotix
How do I reset the Mobotix Move SD-330 to factory defaults?
Press and hold the reset button, located inside the housing, for 10 seconds. The camera will reboot and restore factory settings. The default IP address becomes 10.9.0.1.
What is the default IP address of the Move SD-330?
The default IP address is 10.9.0.1. Set your computer to an IP in the 10.9.0.0/24 subnet and access the camera via a web browser.
How can I update the firmware?
Download the latest firmware from the Mobotix website, log into the camera web interface, go to Maintenance > Firmware Update, and upload the .rom file.
Is the camera weatherproof?
Yes, it has an IP66 rating, making it suitable for outdoor use in rain and dust conditions.
Can I use a microSD card for local recording?
Yes, it supports microSD cards up to 256GB for edge-based recording, enabling local storage without an NVR.
How do I clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. Do not use solvents or water directly on the lens surface.
Does the camera support Power over Ethernet?
Yes, it supports PoE+ (IEEE 802.3at), allowing power and data over a single Ethernet cable, simplifying installation.
How do I set up motion detection alerts?
In the web interface, go to Event > Motion Detection, enable the feature, and configure sensitivity. Then set recipients for email or push notifications.
What protocols are supported?
It supports ONVIF, HTTP, RTSP, Modbus, and secure transmission with HTTPS and SNMP.
How do I perform a manual PTZ operation?
Use the software controller on the web interface or the optional remote control. You can pan 360 degrees continuously and tilt from -10 to +90 degrees.
User questions about Move SD-330 Mobotix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Move SD-330 - Mobotix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Move SD-330 by Mobotix.
USER MANUAL Move SD-330 Mobotix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mobotix
Model : Move SD-330
Category : Security Camera