METRO-H-10KR - Beer Tap Micro Matic - Free user manual and instructions
Find the device manual for free METRO-H-10KR Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Tap Faucet |
| Brand | Micro Matic |
| Model | METRO-H-10KR |
| Material | Chrome-Plated Brass |
| Finish | Polished Chrome |
| Connection Thread | 5/8" - 18 UNF |
| Compatibility | Standard Draft Beer Systems (Kegerators, Beer Towers) |
| Max Operating Pressure | 60 PSI (4.1 bar) |
| Recommended Pressure | 12-15 PSI for Most Beers |
| Flow Rate | 2 oz/sec (59 ml/sec) |
| Temperature Range | 32°F to 40°F (0°C to 4°C) |
| Handle Type | Stainless Steel Lever |
| Mounting | Vertical Tower Mount |
| Draft Line Size | 3/16" ID (7/16" OD) |
| Body Length | 6.5 inches (165 mm) |
| Height | 4.1 inches (104 mm) |
| Weight | 1.1 lbs (0.5 kg) |
| Cleaning Method | Disassemble and Soak in Warm Water with Mild Detergent |
| Maintenance | Replace Gaskets Annually; Lubricate O-Rings with Food-Grade Gel |
| Safety | Lead-Free and FDA-Compliant Materials |
| Spare Parts Available | Handle, Gaskets, Springs, Nozzle |
| Country of Origin | Denmark |
Frequently Asked Questions - METRO-H-10KR Micro Matic
How do I install the METRO-H-10KR beer tap?
Attach the faucet to a standard 5/8" - 18 UNF shank using a wrench, ensuring the O-ring is seated properly to prevent leaks. Tighten snugly but avoid over-torquing.
What size beer line does this faucet fit?
The METRO-H-10KR is designed for 3/16" ID draft beer tubing (7/16" OD). This size is standard for most kegerators and commercial draft systems.
How do I clean and sanitize this tap?
Disassemble the faucet by removing the handle and spout, then soak all parts in warm water with mild detergent. For sanitizing, use a food-safe sanitizer and rinse thoroughly before reassembly.
What pressure should I use with this faucet?
For most beers, set your regulator to 12-15 PSI. However, the faucet can handle up to 60 PSI maximum, so adjust according to your beer type and line length.
Does the tap come with a shank?
The METRO-H-10KR is sold as a faucet only. You will need a compatible shank (typically 5/8" - 18 UNF) and tower or through-wall mounting hardware.
Is the faucet suitable for home kegerators?
Yes, it is ideal for home kegerators and custom draft towers. Its standard connection and durable build make it a popular choice among homebrewers.
Why does my beer foam excessively with this tap?
Excessive foaming is often due to incorrect pressure or temperature. Ensure your beer is between 38-40°F and the pressure is matched to your line length. Also check for blocked air vents in the faucet.
Can I replace the handle with a different style?
Yes, the handle is detachable and can be swapped with any standard Micro Matic replacement handle or compatible aftermarket lever handle using the same thread.
What is the warranty on the Micro Matic METRO-H-10KR?
Micro Matic typically offers a 1-year limited warranty against manufacturing defects. Keep your receipt and contact the retailer for warranty claims.
How often should I replace the O-rings?
Inspect O-rings every 6 months and replace them annually or sooner if they show signs of wear, cracking, or leaking. Use food-grade lubricant to prolong their life.
User questions about METRO-H-10KR Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer Tap in PDF format for free! Find your manual METRO-H-10KR - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. METRO-H-10KR by Micro Matic.
USER MANUAL METRO-H-10KR Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : METRO-H-10KR
Category : Beer Tap