51353 - Range hood KENMORE - Free user manual and instructions
Find the device manual for free 51353 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Kenmore |
| Model | 51353 |
| Mounting Type | Under-cabinet |
| Width | 30 inches |
| Depth | 18.5 inches |
| Height | 7 inches |
| Weight | 28 lbs |
| Power Supply | 120V AC, 60Hz |
| Motor Power | 260 W |
| Airflow Capacity | 400 CFM |
| Number of Speeds | 3 |
| Fan Speed Control | Push-button |
| Lighting Type | 2 x LED bulbs |
| Lighting Power | 2 x 3W LED |
| Filter Type | Reusable stainless steel mesh |
| Dishwasher Safe | Yes |
| Ducting Options | Convertible (vented or recirculating) |
| Noise Level | 6.0 sones |
| Safety Features | Thermal overload protection, CSA approved |
| Maintenance | Clean filters monthly |
| Spare Parts | Grease filters, LED bulbs, fan motor, control switch |
| Warranty | 1-year limited |
Frequently Asked Questions - 51353 KENMORE
How often should I clean the grease filters?
For optimal performance, clean the grease filters every 4 to 6 weeks. Remove the mesh filters and wash them in warm soapy water or the dishwasher. Dry completely before reinstalling.
Can this range hood be used without a vent duct?
Yes, the Kenmore 51353 is convertible. You can install it in the vented mode with ductwork, or use it as a recirculating hood by installing charcoal filters (sold separately) to purify the air.
What is the minimum height above the cooktop for installation?
For electric cooktops, the bottom of the range hood should be at least 26 inches above the cooking surface. For gas cooktops, it should be at least 30 inches. Follow your local building codes.
How do I replace the LED lights?
Turn off the power to the hood. Gently pry out the light fixture using a small flathead screwdriver, disconnect the wiring, and replace with a compatible 3W LED module. Reconnect and push back into place.
Why is the fan not spinning?
First, check the power supply and circuit breaker. If the motor is overheated, the thermal protector may shut it off. Wait for it to cool and press the reset button if available. Also, inspect the fan switch for proper function.
What type of charcoal filters do I need for recirculating mode?
The hood uses two charcoal filters (models 51355 or similar) that attach over the grease filters. They should be replaced every 3 to 6 months depending on cooking habits.
How do I switch from vented to recirculating installation?
In vented mode, connect the ductwork to the top or rear exhaust opening. To convert to recirculating mode, remove the duct cap, insert the charcoal filters, and install a recirculating vent kit (if available) to direct air back into the kitchen.
What is the noise level of this range hood?
The Kenmore 51353 operates at approximately 6.0 sones on the highest speed with a low-level hum on lower settings. This is similar to normal conversation background noise.
Can the range hood be cleaned in the dishwasher?
The grease filters are dishwasher safe. However, the exterior body should be wiped with a soft damp cloth and mild detergent. Do not use abrasive cleaners or immerse the motor in water.
Does the hood come with a remote control?
No, this model does not include a remote control. It features integrated push-button controls on the front panel for easy manual operation of the fan speed and lights.
User questions about 51353 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 51353 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 51353 by KENMORE.