iPOLiS SNV-6013 - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free iPOLiS SNV-6013 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Brand | Hanwha |
| Model | iPOLiS SNV-6013 |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Max Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | Up to 30 fps at 1080p |
| Lens | 3.6mm fixed lens |
| Minimum Illumination | 0.1 Lux (color) |
| Compression | H.264, MJPEG |
| Network Interface | 10/100 Base-T Ethernet |
| PoE Support | Yes (IEEE 802.3af) |
| Power Supply | 12V DC or PoE |
| Dimensions | 70.0 x 59.6 x 131.0 mm |
| Weight | 350 g |
| Operating Temperature | -10°C to 50°C |
| Ingress Protection | IP66 |
| IR Range | Up to 20 m |
| Main Functions | Motion detection, remote viewing, IR night vision |
| Installation | Wall or ceiling mount bracket included |
| Maintenance | Clean lens and housing with a soft dry cloth |
| Safety | Use only certified power supplies; follow local electrical codes |
| Spare Parts and Repairability | No consumer-replaceable parts; contact authorized service center |
| General Information | Supports Hanwha NVR integration and mobile app monitoring |
Frequently Asked Questions - iPOLiS SNV-6013 Hanwha
How do I reset the Hanwha iPOLiS SNV-6013 camera to factory defaults?
Press and hold the reset button on the camera for 5 seconds using a pin. The camera will reboot with factory settings. Ensure you reconfigure the IP address and other network parameters after the reset.
What power source can be used for the SNV-6013?
The camera supports 12V DC and Power over Ethernet (PoE). Use a certified power adaptor or a PoE switch to power the camera safely.
How can I access the camera remotely?
Connect the camera to your local network, then use the Hanwha mobile app or web viewer to log in. For remote access, configure port forwarding on your router or use the manufacturer's cloud service for easier connection.
Is the camera suitable for outdoor use?
Yes, the iPOLiS SNV-6013 has an IP66 rating, making it resistant to dust and powerful water jets, suitable for outdoor installation.
How do I install the camera?
Mount the camera to a wall or ceiling using the included bracket. Route the Ethernet cable to the camera, connect it to your network and power, then adjust the viewing angle for optimal coverage.
Can I record video to an SD card?
This model typically records to a network video recorder (NVR). Check if your camera includes a microSD slot for edge storage; if present, you can insert a compatible card and configure recording in the web interface.
How to configure motion detection?
Log in to the camera's web interface, navigate to Event Settings, enable motion detection, and draw the desired detection zones. You can adjust sensitivity and set actions such as email alerts or recordings.
What is the maximum resolution and frame rate?
The camera provides 1920x1080 (Full HD) resolution at up to 30 frames per second, ensuring smooth and detailed video for surveillance.
How should I clean the camera?
Use a soft, dry microfiber cloth to gently wipe the lens and housing. Avoid abrasive chemicals and never spray water directly onto the camera. Regular cleaning ensures clear video quality.
How can I update the camera firmware?
Download the latest firmware from the Hanwha support website, then log into the camera's web interface, go to System Management > Firmware Upgrade, and upload the downloaded file. Follow the on-screen instructions.
User questions about iPOLiS SNV-6013 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual iPOLiS SNV-6013 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iPOLiS SNV-6013 by Hanwha.