Quasar CM-6206 - Security Camera FLIR - Free user manual and instructions
Find the device manual for free Quasar CM-6206 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | IP security camera |
| Resolution | 6 megapixels (3072 x 2048) |
| Sensor | 1/1.8" CMOS sensor |
| Lens | Motorized lens 2.8 to 12 mm |
| Night vision | Infrared up to 30 m |
| Video compression | H.264, H.265 |
| Audio | Built-in two-way audio |
| Connectivity | Ethernet RJ45, PoE IEEE 802.3af/at |
| Power supply | Power over Ethernet (PoE) |
| Operating temperature | -40°C to 60°C |
| Protection | IP66, IK10 |
| Storage | microSD card support |
| Dimensions | Ø 147 mm x 108 mm |
| Weight | 1.2 kg |
| Main functions | Motion detection, WDR, video analytics |
| Installation | Wall or ceiling mounting |
| Maintenance and cleaning | Clean the window with a soft non-abrasive cloth |
| Security | TLS encryption, password authentication |
| Spare parts and repairability | Available on request from the manufacturer |
| General information | User manual downloadable from notice-facile.com |
Frequently Asked Questions - Quasar CM-6206 FLIR
How do I install my Quasar CM-6206 camera?
To install the camera, attach the bracket to the wall or ceiling using the provided anchors. Connect the Ethernet cable to a PoE-compatible router. Use the FLIR detection tool to find the camera's IP address on your network, then configure it via the web browser.
How do I access my camera remotely?
For remote access, configure port forwarding on your router (ports 80 or 443) and create a DDNS account. You can also use the FLIR cloud service which simplifies setup.
The camera does not detect motion, what should I do?
Check that motion detection is enabled in the camera settings and that the detection zones are correctly defined. Adjust the sensitivity if necessary and make sure the lighting does not change abruptly.
Can I use the camera without an Internet connection?
Yes, the camera works on a local network without Internet. You can access it via your computer or phone on the same WiFi network. Remote access, however, requires the Internet.
How do I reset my camera?
Use a paperclip to press the reset button on the back of the camera for 10 seconds. The settings will return to factory values and the IP address will be reset.
Which microSD card should I use?
The camera supports microSD cards up to 256 GB. Use a Class 10 or UHS-I card to ensure optimal write performance for continuous recording.
Night vision does not activate, why?
Check that day/night mode is set to Automatic in the settings. If the camera is behind glass, the infrared may be reflected. Also make sure the light sensor is not obstructed.
How do I configure two-way audio?
The built-in microphone and speaker allow you to talk through the app. Enable audio in the camera settings and make sure you have allowed access to your smartphone's microphone.
What video formats are supported?
The camera records in H.264 or H.265. These formats are compatible with most video players and video management systems (VMS).
Is the camera waterproof?
Yes, it has IP66 and IK10 protection. This means it resists heavy rain, dust, and impacts. It is therefore suitable for outdoor use.
User questions about Quasar CM-6206 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Quasar CM-6206 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Quasar CM-6206 by FLIR.
USER MANUAL Quasar CM-6206 FLIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLIR
Model : Quasar CM-6206
Category : Security Camera