XT-DIG-11 - Electronics Xantech - Free user manual and instructions
Find the device manual for free XT-DIG-11 Xantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital control interface module for AV systems |
| Brand | Xantech |
| Model | XT-DIG-11 |
| Category | Electronics |
| Dimensions (W x D x H) | 4.5 x 2.8 x 1.6 inches (114 x 71 x 41 mm) |
| Weight | 0.55 lb (250 g) |
| Power Supply | 12 V DC, 500 mA via included adapter |
| Power Consumption | 6 W maximum |
| Connectivity | IR input, IR output, RS-232 control port, USB service port |
| LED Indicators | Power (green), Signal (amber), Status (red) |
| Enclosure Material | High-impact ABS plastic |
| Color | Black |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Main Functions | Distributes digital IR signals to multiple zones, converts IR to RS-232, supports macro commands |
| Installation | Surface mount with adhesive backing or optional mounting screws |
| Compatibility | Works with all Xantech IR systems and most third-party IR emitters |
| Firmware Update | Field-upgradeable via USB connection to a PC |
| Certifications | CE, FCC, RoHS compliant |
| Maintenance | Inspect connections monthly; keep firmware up to date |
| Cleaning | Wipe with a soft, dry cloth; never use liquid cleaners or sprays |
| Safety | Keep away from moisture and heat sources; use only the supplied power adapter |
| Spare Parts | Replacement power adapters, IR emitters, and mounting brackets available |
| Repairability | No user-serviceable parts; contact authorized Xantech service for repairs |
| General Information | For indoor use only; designed for permanent AV installation |
Frequently Asked Questions - XT-DIG-11 Xantech
How do I connect the XT-DIG-11 to my IR system?
Connect the IR input from your keypad or receiver to the device, then connect the IR output to your source equipment. Use the RS-232 port for serial control if needed.
Can the XT-DIG-11 control multiple zones?
Yes, it can control up to four zones by assigning each IR output port to a specific zone via the ID button and Zone Config mode.
What power adapter do I need?
Use the included 12V DC / 500mA adapter. Check the LED indicator; if it is not green, the adapter may be faulty.
How do I update the firmware?
Download the latest firmware from the Xantech website, connect the device to your PC with a USB cable, and run the Firmware Update Tool.
What do the LED indicators mean?
Green indicates power on, amber indicates active IR signal, and red indicates an error or communication failure.
How do I mount the unit?
Use the adhesive backing for flat surfaces or the screw holes (2.5 mm) for permanent mounting. Keep away from metal panels that may block IR.
Is the XT-DIG-11 compatible with other brands?
It supports standard IR protocols, so it works with most IR receivers and emitters, even from third-party brands.
How do I clean the device?
Disconnect power, then wipe the enclosure with a soft, dry cloth. Never use abrasive pads or chemical cleaners.
Does it require professional installation?
Basic setup is plug-and-play, but for multi-zone integration with RS-232 we recommend a qualified AV installer.
What should I do if the device stops responding?
Power-cycle the unit, verify the power adapter is connected, then try resetting the device via the ID button for 10 seconds. If the red LED persists, contact support.
User questions about XT-DIG-11 Xantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electronics in PDF format for free! Find your manual XT-DIG-11 - Xantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XT-DIG-11 by Xantech.
USER MANUAL XT-DIG-11 Xantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xantech
Model : XT-DIG-11
Category : Electronics