SMAUD01 - Audio System Xantech - Free user manual and instructions
Find the device manual for free SMAUD01 Xantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-room Audio System |
| Brand | Xantech |
| Model | SMAUD01 |
| Mounting Type | 19-inch rack-mountable (1U) |
| Dimensions (W x H x D) | 17.0 x 1.75 x 8.0 inches (430 x 44 x 203 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Power Supply | 12 V DC external adapter (included) |
| Power Consumption | 15 W max |
| Audio Inputs | 2 stereo line inputs (RCA) |
| Audio Outputs | 4 zone speaker outputs (amplified) |
| Number of Zones | 4 |
| Speaker Impedance | 4 - 8 ohms |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Total Harmonic Distortion | 0.05% at 1 kHz |
| Signal-to-Noise Ratio | Greater than 90 dB |
| Chassis Material | Brushed aluminum faceplate, steel body |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Safety Certifications | CE, FCC marked |
| Maintenance | Inspect connections periodically; update firmware via USB if applicable |
| Cleaning | Wipe with a soft, dry cloth; do not use chemical cleaners |
| Spare Parts | Replacement power adapters and remote controls sold separately |
| Repairability | Repair by authorized Xantech technicians; user-replaceable fuse |
| General Information | Compatible with Xantech keypads and serial controllers |
Frequently Asked Questions - SMAUD01 Xantech
How do I connect the SMAUD01 to my amplifier and speakers?
Connect your audio sources to the stereo line inputs using RCA cables. Then connect each zone's speakers to the corresponding amplified output terminals. Ensure the power adapter is connected before turning on the unit.
What are the recommended speaker impedance and wire gauge?
The SMAUD01 supports speakers rated from 4 to 8 ohms. For most installations, use 16-gauge wire for runs up to 50 feet; for longer runs, use 14-gauge.
Can I control each zone's volume independently?
Yes, the unit includes independent zone volume controls, accessible via front-panel buttons or the optional Xantech keypad.
How do I update the firmware on the audio system?
Check the Xantech website for firmware updates. Download the update file to a USB drive, insert it into the USB port on the rear panel, and follow the on-screen instructions.
What should I do if there is no sound output?
First, check that the source is playing and the input is correctly selected. Verify that speaker wires are not shorted and that the volume is not muted. If the issue persists, reset the unit as described in the manual.
Is the SMAUD01 compatible with smart home systems?
Yes, the SMAUD01 can be controlled via RS-232 or third-party controllers using the included ASCII protocol.
How do I reset the unit to factory defaults?
To reset, press and hold the front-panel reset button for 5 seconds until the LED flashes. Release the button; all settings return to factory defaults.
What is the maximum cable length for the included IR remote?
The IR remote receiver has a range of approximately 30 feet (10 meters) in direct line of sight. For longer distances, use an Xantech IR repeater.
Can I use the SMAUD01 with multiple sources at the same time?
Yes, the unit supports up to two stereo sources simultaneously and can route them to different zones independently.
How do I mount the device in a standard 19-inch rack?
Use the included rack-mount ears to secure the device to the front rack rails. Tighten the #10-32 screws to the standard rack holes, and support the rear with a shelf if needed.
User questions about SMAUD01 Xantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio System in PDF format for free! Find your manual SMAUD01 - Xantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMAUD01 by Xantech.
USER MANUAL SMAUD01 Xantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xantech
Model : SMAUD01
Category : Audio System