CV48SSLSS - Range hood GE - Free user manual and instructions
Find the device manual for free CV48SSLSS GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | GE |
| Model | CV48SSLSS |
| Width | 48 inches (121.9 cm) |
| Finish | Brushed stainless steel |
| Installation type | Wall or island mount |
| Speeds | 4 speeds |
| Control | Button panel |
| Lighting | Integrated LED lights |
| Filters | Washable stainless steel filters |
| Ventilation system | Ducted or ductless (recirculating) |
| Extraction power | Up to 600 CFM |
| Noise level | Less than 65 dB |
| Motor type | Centrifugal motor |
| Electrical supply | 120 V / 60 Hz |
| Maximum power consumption | 230 W |
| Approximate weight | 36 kg (80 lbs) |
| Adjustable height | 30 to 48 inches |
| Warranty | 1 year limited |
| Maintenance | Dishwasher-safe filters |
Frequently Asked Questions - CV48SSLSS GE
How do I properly install the GE CV48SSLSS range hood?
For a safe installation, follow the manual. A height of 65 to 75 cm above the cooking surface is recommended. Connect the hood to an exhaust duct or install the recirculation kit according to your setup. Make sure to securely attach it to the wall or island.
How often should I clean the grease filters?
Clean the stainless steel filters every 2 to 3 months depending on usage. You can wash them in the dishwasher or by hand with warm water and detergent. A clogged filter reduces extraction efficiency.
How do I replace the LED lights on the hood?
The LED lights are integrated. To replace them, disconnect the hood from the power supply, remove the panel cover, and take out the light module. See the manual for the specific replacement model. If you are unsure, contact technical support.
Can it operate in recirculation mode without an exterior vent?
Yes, the hood supports recirculation mode. You will need to purchase an activated charcoal kit that filters odors and returns clean air to the kitchen. This kit is installed inside the hood.
Why is the hood noisier than normal?
Excessive noise may be due to clogged filters, a loose installation, or an object trapped in the fan. Check these items and clean or adjust as needed. If the noise persists, contact technical support.
What extraction power do I need for my kitchen?
An extraction capacity of approximately 100 CFM per 10,000 BTU of your kitchen is recommended, or based on size. For a standard kitchen, 600 CFM is sufficient. For large kitchens, consider a higher capacity.
Can I install an extra charcoal filter?
Yes, you can add the charcoal filter for recirculation mode. You must remove the metal grease filters and place the charcoal filters instead. See the manual for the exact compatible filter model.
What should I do if the hood does not turn on?
First, check if it is properly connected to the power outlet. Then, check the control panel and whether any fuse or circuit breaker has tripped. If the problem persists, do not try to disassemble it; contact a qualified technician.
How can I keep the hood in good condition?
Perform regular cleaning of the exterior surface with a damp cloth and mild detergent. Clean the filters periodically and check the lights and motor operation. Avoid abrasive products that damage the stainless steel.
Where can I find spare parts for my hood?
You can purchase original parts through the GE replacement parts service or authorized dealers. You will need the model number CV48SSLSS to find compatible filters, bulbs, or motors.
User questions about CV48SSLSS GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual CV48SSLSS - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CV48SSLSS by GE.