2170822 - Screwdriver Kooper - Free user manual and instructions
Find the device manual for free 2170822 Kooper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Cordless Screwdriver |
| Brand | Kooper |
| Model | 2170822 |
| Power Supply | 18V Li-ion Battery |
| Battery Capacity | 1.5 Ah |
| Charging Time | Approximately 1 hour |
| Voltage | 18 V |
| No-Load Speed | 0-550 RPM |
| Torque Settings | 21+1 Positions |
| Maximum Torque | 30 Nm |
| Chuck Type | 1/4" Hex Quick-Release |
| Dimensions (L x W x H) | 180 x 60 x 180 mm |
| Weight | 1.1 kg |
| LED Work Light | Yes |
| Forward/Reverse Switch | Yes |
| Variable Speed Trigger | Yes |
| Belt Clip | Yes |
| Soft Grip Handle | Yes |
| Accessories Included | 2x Bits, Charger, Carrying Case |
| Maintenance | Clean with a dry cloth |
| Safety Lock-off | Yes |
| Spare Parts Availability | Contact Kooper Support |
Frequently Asked Questions - 2170822 Kooper
How do I change the bits on my Kooper 2170822 screwdriver?
To change bits, first ensure the screwdriver is turned off. Pull the chuck collar forward to release the current bit, then insert the new bit until it clicks into place. The 1/4-inch hex chuck is compatible with standard screwdriver bits.
How do I charge the battery?
Connect the charger to a power outlet and plug the battery into the charger. The LED indicator on the charger will show red while charging and turn green when fully charged. Typical charging time is about 1 hour.
What is the maximum torque of this screwdriver?
The Kooper 2170822 offers a maximum torque of 30 Nm, which is suitable for driving screws into wood, drywall, and light metal applications.
How do I adjust the torque settings?
Rotate the torque adjustment ring located behind the chuck. There are 21 torque positions plus a drill setting. Lower numbers provide less torque for delicate work, while higher numbers give more power for driving into harder materials.
How do I use the forward/reverse switch?
The forward/reverse switch is located above the trigger. Slide it to the left for forward rotation (driving screws in) and to the right for reverse (removing screws). Always wait for the chuck to stop before changing direction.
Can I use this screwdriver for drilling?
This screwdriver is primarily designed for screwdriving. While it can make small holes in soft materials using drill bits with a 1/4-inch hex shank, it is not intended for heavy-duty drilling. For best results, use the highest torque setting and a sharp drill bit.
How should I maintain the screwdriver?
Regularly wipe the exterior with a dry cloth to remove dust and debris. Keep the chuck clean and free of metal shavings. Avoid using solvents or harsh chemicals. Store in a dry place when not in use.
What safety precautions should I take?
Always wear safety goggles when operating the screwdriver. Keep hands away from the rotating chuck. Disconnect the battery before changing bits or performing maintenance. Do not expose the tool to moisture or use it near flammable liquids.
How long does the battery last on a full charge?
Battery life depends on the application and torque setting. On average, a fully charged 1.5 Ah battery can drive about 150-200 screws into softwood. For extended work, consider purchasing a spare battery.
Can I dispose of the battery in regular trash?
No. Lithium-ion batteries must be recycled or disposed of according to local regulations. Contact your local waste management facility for proper disposal options. Never incinerate the battery.
User questions about 2170822 Kooper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual 2170822 - Kooper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2170822 by Kooper.