PB 2222 - Scale Orbegozo - Free user manual and instructions
Find the device manual for free PB 2222 Orbegozo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital scale |
| Brand | Orbegozo |
| Model | PB 2222 |
| Color | White |
| Surface material | Tempered glass |
| Dimensions (L x W x H) | 30 x 30 x 4 cm |
| Weight | 1.5 kg |
| Maximum capacity | 180 kg |
| Accuracy | 100 g |
| Units of measurement | kg / lb / st |
| Display type | LCD digital |
| Power supply | 2 AAA batteries (1.5 V) |
| Main functions | Electronic weighing, automatic shut-off, overload indicator |
| Measurement system | 4 precision sensors |
| Maintenance and cleaning | Clean with a damp cloth, never immerse in water |
| Safety | Avoid shock and dropping |
| Spare parts | Available from Orbegozo customer service |
| Warranty | 2 years |
Frequently Asked Questions - PB 2222 Orbegozo
How to turn on the Orbegozo PB 2222 scale?
To turn on the scale, place a foot on the platform or press gently on the surface. The LCD screen turns on automatically. After a few seconds, the display stabilizes and shows your weight.
How do I change the unit of measurement (kg/lb/st)?
There is usually a button on the side or back of the scale. Press it to switch between kg, lb, and st. The selected unit appears on the screen. If no button is visible, check the manual for the automatic switching mode.
Why is the scale display unstable?
Instability can be caused by an uneven surface or moving during the measurement. Make sure the scale is placed on a flat, hard floor. Stay still and wait for the number to freeze. If the problem persists, check the batteries.
What to do if the scale displays an error message?
If the screen displays a message such as Err or OL, this usually means an overload (weight over 180 kg) or a defective sensor. Place the scale on the floor without any weight for a few seconds, then try again. If the error persists, contact customer service.
How to clean the PB 2222 scale?
Use a soft, slightly damp, non-abrasive cloth to clean the glass surface. Never use solvents or excess water. Avoid water entering the sensors or the battery compartment.
The scale doesn't turn on, what to do?
First check that the batteries are correctly installed and polarized. Replace the batteries with new AAA batteries if necessary. Clean the battery contacts with a dry cloth. If the problem persists, contact after-sales service.
What is the maximum weighing capacity?
The Orbegozo PB 2222 scale can measure up to 180 kg (about 28 st or 397 lb). Beyond this value, an overload indicator appears to protect the device.
How to get accurate measurements every time?
For optimal accuracy, place the scale on a hard, flat surface, not on carpet or a rug. Weigh yourself at the same time of day, ideally in the morning, and remain completely still during the measurement.
How to install the scale's batteries?
Open the battery compartment cover located under the scale. Insert two 1.5 V AAA batteries, respecting the polarities (+/-). Close the cover until it clicks. If the scale doesn't turn on, check the polarity and position of the batteries.
Is the scale covered by warranty?
Yes, this Orbegozo model has a 2-year warranty against manufacturing defects. For any claim, keep your proof of purchase and contact Orbegozo customer service. The warranty does not cover damage caused by misuse.
User questions about PB 2222 Orbegozo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual PB 2222 - Orbegozo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PB 2222 by Orbegozo.
USER MANUAL PB 2222 Orbegozo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Orbegozo
Model : PB 2222
Category : Scale