PL4123XIN - Dishwasher SMEG - Free user manual and instructions
Find the device manual for free PL4123XIN SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Smeg |
| Model | PL4123XIN |
| Installation Type | Built-in |
| Finish | Stainless Steel |
| Capacity | 13 Place Settings |
| Energy Class | A+ |
| Annual Energy Consumption | 270 kWh |
| Water Consumption per Cycle | 9.5 Liters |
| Noise Level | 44 dB (A) |
| Number of Programs | 5 |
| Programs | Eco, Intensive, Normal, Quick, Soak |
| Display Type | LED |
| Adjustable Upper Rack | Yes |
| Cutlery Basket | Yes |
| AquaStop Protection | Yes |
| Child Lock | Yes |
| Delayed Start | 1-24 Hours |
| Half Load Option | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 50 kg |
| Power Supply Voltage | 220-240 V |
| Frequency | 50 Hz |
| Energy Consumption per Cycle | 0.93 kWh |
Frequently Asked Questions - PL4123XIN SMEG
How do I start a quick wash cycle?
Press the Power button, then select the Quick program using the program selector. Press Start to begin. The quick wash cycle lasts approximately 30 minutes and is ideal for lightly soiled dishes.
How do I clean the filters?
Turn the filter assembly counterclockwise and lift it out. Rinse under running water and use a soft brush if needed. Replace and turn clockwise until it locks. Clean filters monthly for optimal performance.
Why is my dishwasher not draining?
Check if the drain hose is kinked or blocked. Clean the filter assembly and check the sump for obstructions. Ensure the garbage disposal (if connected) is clear. If the problem persists, contact service.
Can I open the door during a cycle?
Yes, you can pause the cycle by pressing Start/Stop. Wait a few seconds for the spray arms to stop before opening. This may interrupt drying, but the cycle will resume when closed.
How do I adjust the upper rack height?
Pull out the upper rack partially, then use the rack height adjustment handles on both sides. Raise or lower the rack to accommodate taller items in the lower rack. Ensure both sides are locked at the same height.
What does the salt indicator light mean?
The salt indicator illuminates when the water softener requires regeneration salt. Add dishwasher salt to the dedicated compartment located at the bottom of the tank, then run a rinse cycle.
How much detergent should I use?
Use a high-quality dishwasher detergent according to the manufacturer's dose. For most models, 20-25 grams for a standard cycle is sufficient. Adjust based on water hardness and soil level.
What is the maximum capacity of this dishwasher?
The PL4123XIN holds up to 13 place settings, making it suitable for a medium-sized household. Load dishes so that water can reach all surfaces for best cleaning results.
How do I reset the dishwasher to factory settings?
Turn off the dishwasher at the power switch, wait for 10 seconds, then turn it back on. Press and hold the RESET or POWER button for a few seconds until the display resets. Some models may require a specific combination.
Is the appliance protected from water leaks?
Yes, this model features AquaStop protection, which automatically shuts off the water inlet if a leak is detected, preventing water damage. The system is located on the inlet hose.
User questions about PL4123XIN SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual PL4123XIN - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PL4123XIN by SMEG.
USER MANUAL PL4123XIN SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : PL4123XIN
Category : Dishwasher