PA-40 - Receiver ALECTO - Free user manual and instructions
Find the device manual for free PA-40 ALECTO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wireless receiver for home alerting |
| Brand and model | Alecto PA-40 |
| Compatible transmitters | Alecto PA series (e.g., PA-10, PA-20) |
| Wireless frequency | 433.92 MHz |
| Range (open field) | Up to 120 meters |
| Range (indoor) | Up to 40 meters |
| Number of ring tones | 4 preset melodies |
| Volume control | Adjustable, 3 levels + off |
| Visual alert | Red LED flashing |
| Memory function | Stores last signal, LED flashes until reset |
| Pairing | Automatic with Alecto transmitters |
| Power supply | 4x AAA batteries (LR03) or 6V DC adapter (included) |
| Battery life | Up to 9 months (alkaline, normal use) |
| Dimensions (W x H x D) | 85 x 85 x 22 mm |
| Weight | 95 g (without batteries) |
| Mounting options | Tabletop or wall mount (keyhole) |
| Operating temperature | 0°C to 45°C |
| Cleaning | Wipe with a soft dry cloth |
| Safety | Not waterproof, keep away from moisture |
| Repairability | Batteries replaceable; other parts via service |
Frequently Asked Questions - PA-40 ALECTO
How do I pair my PA-40 receiver with an Alecto transmitter?
To pair, press and hold the pairing button for 3 seconds until the LED flashes. Then activate the transmitter (e.g., press the alarm button). The receiver will confirm with a tone. The pairing is complete.
What type of batteries does the PA-40 require?
The receiver uses four AAA alkaline batteries (LR03). You can also use the included 6V DC adapter for continuous power.
How long do the batteries last?
With typical use of about 10 signals per day, the batteries last up to 9 months. To conserve battery, turn off the backlight if available or reduce volume.
What is the wireless range of the PA-40?
The range is up to 120 meters in open field and up to 40 meters indoors depending on walls and interference.
Can I adjust the volume on the receiver?
Yes, rotate the volume dial on the side. You have three volume levels and an off position for silent operation.
Why does the LED keep flashing after I receive a signal?
The memory function stores the last event. To reset the LED, press the memory button briefly. This helps you not miss an alert.
Can I mount the PA-40 on a wall?
Yes, the back panel has a keyhole slot. Use a screw to hang it. Ensure the screw head fits the slot.
How do I clean the receiver?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners.
Is the PA-40 waterproof?
No, it is not waterproof. Protect it from rain and moisture. Placing it near a window or bathroom is not recommended.
What should I do if the receiver stops working?
First, check the batteries and replace them if needed. Verify that the transmitter is within range. If the problem persists, contact Alecto customer service. Do not open the device yourself.
User questions about PA-40 ALECTO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PA-40 - ALECTO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA-40 by ALECTO.
USER MANUAL PA-40 ALECTO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALECTO
Model : PA-40
Category : Receiver