PR2200SWRM2U - Inverter CyberPower - Free user manual and instructions
Find the device manual for free PR2200SWRM2U CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UPS (Uninterruptible Power Supply) |
| Brand | CyberPower |
| Model | PR2200SWRM2U |
| Form Factor | 2U Rackmount / Tower convertible |
| Rated Power | 2200VA / 1980W |
| Output Waveform | Pure Sine Wave |
| Technology | Double-Conversion Online |
| Input Voltage Range | 160-280 VAC |
| Output Voltage | 230 VAC |
| Frequency | 50/60 Hz (auto sensing) |
| Transfer Time | 0 ms |
| Battery Type | Maintenance-free sealed lead-acid (user-replaceable) |
| Backup Time | ~10 min at full load; ~24 min at half load |
| Communication Ports | USB, RS-232, EPO port, SNMP slot |
| Management Software | PowerPanel RMM |
| Display | LCD status and configuration screen |
| Surge Protection | Surge and noise filtering |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Dimensions (W x D x H) | 17.2 x 25.6 x 3.4 in (437 x 650 x 86 mm) |
| Weight | 29.1 kg (64.2 lbs) |
| Certifications | CE, TÜV, EAC |
| Maintenance | Inspect batteries annually; ensure vents are dust-free |
| Cleaning | Unplug and wipe with a dry cloth; use compressed air for vents |
| Safety Features | Overload, short-circuit, and thermal protection |
| Spare Parts & Repairability | User-replaceable batteries; other service by qualified technicians |
Frequently Asked Questions - PR2200SWRM2U CyberPower
How to rack-mount the PR2200SWRM2U UPS?
Attach the included rack-mount ears to the sides, slide the unit into a standard 19-inch 2U rack, and secure with screws. Ensure adequate ventilation.
Can I replace the battery myself?
Yes, the UPS features a user-replaceable battery. Open the front cover, disconnect the battery cables, and slide the battery out. Insert the new battery and restart the UPS.
What does a continuous beeping alarm indicate?
A continuous beep usually signals a battery fault or overload. Check the LCD, reduce the connected load, or replace the battery.
How do I connect this UPS to my network?
Use the USB or RS-232 port with CyberPower's PowerPanel software. For remote monitoring, install a SNMP card in the built-in slot.
What is the expected battery runtime?
At half load, you can expect about 24 minutes of backup. Full load yields about 10 minutes, depending on battery condition.
How to clean and maintain the UPS?
Unplug the UPS and wipe the exterior with a dry cloth. Use compressed air to remove dust from ventilation slots to prevent overheating.
Is the output power pure sine wave?
Yes, this UPS produces a pure sine wave output, making it safe for sensitive electronics.
How to use the Emergency Power Off (EPO) feature?
Connect an external EPO switch to the dedicated port, then enable the EPO function via the LCD menu.
What warranty covers the PR2200SWRM2U?
CyberPower provides a 3-year warranty on this model, including the internal batteries.
Why does the battery indicator show low after charging?
This may indicate the battery is reaching the end of its service life. Try a battery calibration, and if the issue persists, replace the battery.
User questions about PR2200SWRM2U CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual PR2200SWRM2U - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PR2200SWRM2U by CyberPower.
USER MANUAL PR2200SWRM2U CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PR2200SWRM2U
Category : Inverter