9079SF - Angle Grinder MAKITA - Free user manual and instructions
Find the device manual for free 9079SF MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Brand | Makita |
| Model | 9079SF |
| Power Source | Corded electric |
| Input Power | 7.5 A |
| Voltage | 120 V AC/DC |
| No-Load Speed | 11,000 RPM |
| Wheel Diameter | 4-1/2 in (115 mm) |
| Spindle Thread | 5/8 in - 11 UNC |
| Switch Type | Slide switch |
| Side Handle | Yes, adjustable |
| Spindle Lock | Yes, for easy wheel changes |
| AC/DC Capacity | Can be used with AC or DC power sources |
| Dust Protection | Labyrinth construction seals motor from dust |
| Dimensions (L x W x H) | 12 x 5 x 5 in (305 x 127 x 127 mm) |
| Net Weight | 5.1 lb (2.3 kg) |
| Included Accessories | Side handle, grinding wheel, wrench |
| Maintenance | Clean air vents regularly and replace worn carbon brushes |
| Cleaning | Wipe with a dry cloth; do not use solvents |
| Safety | Wear eye protection and keep both hands on the grinder |
| Repair and Spare Parts | Use genuine Makita carbon brushes and replacement parts |
Frequently Asked Questions - 9079SF MAKITA
What is the wheel diameter for the Makita 9079SF?
The Makita 9079SF uses a 4-1/2 inch (115 mm) grinding wheel. Always choose wheels rated for at least 11,000 RPM.
How do I change the grinding disc on this angle grinder?
Unplug the grinder, press and hold the spindle lock, then use the supplied wrench to loosen the clamping nut. Replace the disc, retighten the nut, and release the spindle lock.
Can the Makita 9079SF operate on DC power?
Yes, this model is designed with AC/DC capability. It works on household AC power and on compatible DC sources, such as generators or battery-backed power supplies.
What maintenance does the grinder require?
Keep the air vents free of dust, inspect the power cord regularly, and replace carbon brushes when they wear down. Use only genuine Makita replacement brushes.
What safety precautions should I take while using this angle grinder?
Always wear eye protection, gloves, and hearing protection. Use both hands on the grinder, keep the wheel guard in place, and never operate the tool without the side handle.
How do I replace the carbon brushes on the 9079SF?
Unplug the tool, remove the brush caps on the motor housing, pull out the worn brushes, insert new genuine Makita carbon brushes, and tighten the caps.
What is the no-load speed of the Makita 9079SF?
The no-load speed is 11,000 RPM. This high speed is suitable for cutting and grinding steel, masonry, and other materials.
Can the grinder be used for cutting metal?
Yes, when fitted with an appropriate cut-off wheel, the grinder can cut through metal. Use a guard for cut-off wheels and always clamp small workpieces.
What accessories can I use with this angle grinder?
You can use grinding wheels, cut-off discs, flap discs, wire brushes, and sanding disc backing pads in the 4-1/2 inch size with a 5/8 inch arbor.
How should I clean the Makita 9079SF after use?
Wipe the exterior with a dry cloth and use compressed air to blow dust out of the motor vents. Do not use water or chemical solvents.
User questions about 9079SF MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual 9079SF - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9079SF by MAKITA.
USER MANUAL 9079SF MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : 9079SF
Category : Angle Grinder